See the live Australia fire map

Fire near Halls Creek (WA)

Satellite detection (unconfirmed)

Very intense fire near Halls Creek (WA), first detected 29 Sep 2026 and last seen . It has been picked up by 57 satellite detections, peaking at 218 MW.

Status
Recent
First detected
29 Sep 2026, 04:44 UTC
Last detected
29 Sep 2026, 17:04 UTC
Duration
12.3 h
Detections
57
Peak intensity (FRP)
218 MW
Peaked at
29 Sep, 06:07 UTC
Fire footprint
3.4 km × 4.6 km
Detection sources
57 DEA
State
WA
Confirmation
Satellite only
Data source
DEA

Satellite detections — 57 hot spots

This fire is 57 satellite heat detections merged into one event across 1 day (57 DEA). Each row is one satellite pass over a burning pixel — all of them are plotted on the map above, where the most recent detections are ringed in white. Tap any point on the map for its time and intensity, or switch on the heat map (top-right) to see where activity concentrated.

Time (UTC)IntensitySourceLatitude, Longitude
29 Sep 2026, 17:04 1 MW DEA -20.103, 128.001
29 Sep 2026, 16:45 1 MW DEA -20.102, 128.000
29 Sep 2026, 16:45 1 MW DEA -20.106, 127.999
29 Sep 2026, 16:45 1 MW DEA -20.102, 128.000
29 Sep 2026, 16:45 1 MW DEA -20.106, 127.999
29 Sep 2026, 16:35 — DEA -20.103, 127.994
29 Sep 2026, 16:08 1 MW DEA -20.105, 128.001
29 Sep 2026, 16:08 1 MW DEA -20.105, 128.001
29 Sep 2026, 07:17 — DEA -20.108, 127.983
29 Sep 2026, 06:17 48 MW DEA -20.108, 127.983
29 Sep 2026, 06:17 140 MW DEA -20.108, 128.004
29 Sep 2026, 06:17 49 MW DEA -20.128, 128.002
29 Sep 2026, 06:07 25 MW DEA -20.089, 127.985
29 Sep 2026, 06:07 27 MW DEA -20.088, 128.006
29 Sep 2026, 06:07 115 MW DEA -20.108, 127.983
29 Sep 2026, 06:07 218 MW DEA -20.108, 128.004
29 Sep 2026, 06:07 28 MW DEA -20.129, 127.981
29 Sep 2026, 06:07 70 MW DEA -20.128, 128.002
29 Sep 2026, 05:57 35 MW DEA -20.108, 127.983
29 Sep 2026, 05:57 90 MW DEA -20.108, 128.004
29 Sep 2026, 05:57 26 MW DEA -20.128, 128.002
29 Sep 2026, 05:52 64 MW DEA -20.108, 128.014
29 Sep 2026, 05:52 132 MW DEA -20.109, 128.006
29 Sep 2026, 05:52 10 MW DEA -20.098, 128.003
29 Sep 2026, 05:52 5 MW DEA -20.116, 128.014
29 Sep 2026, 05:52 67 MW DEA -20.112, 128.009
29 Sep 2026, 05:52 65 MW DEA -20.105, 128.011
29 Sep 2026, 05:52 67 MW DEA -20.106, 128.007
29 Sep 2026, 05:52 11 MW DEA -20.101, 128.006
29 Sep 2026, 05:41 — DEA -20.096, 128.002
29 Sep 2026, 05:41 — DEA -20.099, 128.002
29 Sep 2026, 05:41 — DEA -20.103, 128.009
29 Sep 2026, 05:41 — DEA -20.111, 128.006
29 Sep 2026, 05:41 — DEA -20.114, 128.009
29 Sep 2026, 05:34 17 MW DEA -20.107, 128.006
29 Sep 2026, 05:34 12 MW DEA -20.112, 128.013
29 Sep 2026, 05:34 11 MW DEA -20.111, 128.014
29 Sep 2026, 05:34 11 MW DEA -20.108, 128.008
29 Sep 2026, 05:34 11 MW DEA -20.105, 128.008
29 Sep 2026, 05:21 — DEA -20.107, 128.006
29 Sep 2026, 04:57 18 MW DEA -20.117, 128.009
29 Sep 2026, 04:57 14 MW DEA -20.110, 128.008
29 Sep 2026, 04:57 13 MW DEA -20.103, 128.007
29 Sep 2026, 04:57 24 MW DEA -20.115, 128.011
29 Sep 2026, 04:57 20 MW DEA -20.112, 128.010
29 Sep 2026, 04:57 18 MW DEA -20.105, 128.009
29 Sep 2026, 04:57 18 MW DEA -20.117, 128.009
29 Sep 2026, 04:57 14 MW DEA -20.110, 128.008
29 Sep 2026, 04:57 13 MW DEA -20.103, 128.007
29 Sep 2026, 04:57 18 MW DEA -20.117, 128.009
29 Sep 2026, 04:57 14 MW DEA -20.110, 128.008
29 Sep 2026, 04:57 13 MW DEA -20.103, 128.007
29 Sep 2026, 04:57 20 MW DEA -20.112, 128.010
29 Sep 2026, 04:57 18 MW DEA -20.105, 128.009
29 Sep 2026, 04:44 — DEA -20.103, 128.006
29 Sep 2026, 04:44 — DEA -20.111, 128.006
29 Sep 2026, 04:44 — DEA -20.114, 128.006

Other fires nearby

This is an unconfirmed satellite detection, not an official warning. Satellites detect heat, which may be a bushfire, a hazard-reduction burn, or industrial activity. Always check the official source and, in an emergency, call 000.

Official information for WA: Emergency WA (DFES).

Frequently asked questions

Is this a real bushfire?

Unless it is marked as matched to an official incident, this is an unconfirmed satellite detection. Satellites detect heat, which can be a bushfire, a hazard-reduction burn or an industrial source. Check the official warnings for confirmation.

What does “peak intensity (FRP)” mean?

FRP (fire radiative power, in megawatts) is how much heat the fire was giving off when a satellite detected it. The peak is the highest reading across all detections — a rough guide to how intense the fire has been.

Why are several nearby detections shown as one fire?

We group satellite detections that are close together in space and time into a single fire event, so a fire front seen across multiple passes appears as one fire rather than scattered dots.

How do I get the official information for this fire?

Follow the official source link on this page (where available) and your state fire agency. In an emergency call 000.