See the live Australia fire map

Fire near Halls Creek (WA)

Satellite detection (unconfirmed)

Very intense fire near Halls Creek (WA), first detected 29 Sep 2026 and last seen . It has been picked up by 46 satellite detections, peaking at 563 MW.

Status
Recent
First detected
29 Sep 2026, 02:37 UTC
Last detected
30 Sep 2026, 05:33 UTC
Duration
26.9 h
Detections
46
Peak intensity (FRP)
563 MW
Peaked at
29 Sep, 02:57 UTC
Fire footprint
5.1 km × 4.8 km
Detection sources
46 DEA
State
WA
Confirmation
Satellite only
Data source
DEA

How this fire has evolved

Satellite detections per day and the strongest reading each day — a quick sense of when this fire flared up and when it eased. Times are UTC.

DayDetectionsPeak intensitySources
29 Sep 2026 32 563 MW DEA
30 Sep 2026 14 244 MW DEA

Satellite detections — 46 hot spots

This fire is 46 satellite heat detections merged into one event across 2 days (46 DEA). Each row is one satellite pass over a burning pixel — all of them are plotted on the map above, where the most recent detections are ringed in white. Tap any point on the map for its time and intensity, or switch on the heat map (top-right) to see where activity concentrated.

Time (UTC)IntensitySourceLatitude, Longitude
30 Sep 2026, 05:33 244 MW DEA -20.381, 126.467
30 Sep 2026, 05:33 67 MW DEA -20.382, 126.458
30 Sep 2026, 05:33 126 MW DEA -20.383, 126.465
30 Sep 2026, 05:33 25 MW DEA -20.384, 126.461
30 Sep 2026, 05:33 25 MW DEA -20.385, 126.456
30 Sep 2026, 05:33 126 MW DEA -20.379, 126.465
30 Sep 2026, 05:33 25 MW DEA -20.380, 126.460
30 Sep 2026, 05:22 — DEA -20.381, 126.453
30 Sep 2026, 05:22 — DEA -20.381, 126.457
30 Sep 2026, 05:15 52 MW DEA -20.383, 126.459
30 Sep 2026, 05:15 16 MW DEA -20.382, 126.452
30 Sep 2026, 03:57 57 MW DEA -20.375, 126.440
30 Sep 2026, 03:17 26 MW DEA -20.375, 126.461
30 Sep 2026, 03:17 27 MW DEA -20.375, 126.440
29 Sep 2026, 16:08 1 MW DEA -20.377, 126.448
29 Sep 2026, 16:08 1 MW DEA -20.377, 126.448
29 Sep 2026, 06:17 85 MW DEA -20.396, 126.439
29 Sep 2026, 05:41 — DEA -20.373, 126.431
29 Sep 2026, 05:37 29 MW DEA -20.396, 126.439
29 Sep 2026, 05:34 43 MW DEA -20.408, 126.453
29 Sep 2026, 05:34 49 MW DEA -20.406, 126.455
29 Sep 2026, 05:34 21 MW DEA -20.387, 126.449
29 Sep 2026, 05:34 24 MW DEA -20.386, 126.449
29 Sep 2026, 05:34 17 MW DEA -20.388, 126.441
29 Sep 2026, 05:34 30 MW DEA -20.386, 126.447
29 Sep 2026, 05:34 36 MW DEA -20.401, 126.452
29 Sep 2026, 05:34 91 MW DEA -20.394, 126.450
29 Sep 2026, 05:34 21 MW DEA -20.402, 126.454
29 Sep 2026, 05:34 21 MW DEA -20.399, 126.453
29 Sep 2026, 05:21 — DEA -20.381, 126.438
29 Sep 2026, 05:07 25 MW DEA -20.396, 126.439
29 Sep 2026, 04:57 20 MW DEA -20.383, 126.442
29 Sep 2026, 04:57 20 MW DEA -20.383, 126.442
29 Sep 2026, 04:37 28 MW DEA -20.416, 126.437
29 Sep 2026, 03:47 55 MW DEA -20.396, 126.439
29 Sep 2026, 03:27 51 MW DEA -20.396, 126.439
29 Sep 2026, 03:07 29 MW DEA -20.416, 126.437
29 Sep 2026, 03:07 50 MW DEA -20.396, 126.439
29 Sep 2026, 02:57 477 MW DEA -20.416, 126.437
29 Sep 2026, 02:57 246 MW DEA -20.415, 126.456
29 Sep 2026, 02:57 563 MW DEA -20.396, 126.439
29 Sep 2026, 02:57 — DEA -20.395, 126.459
29 Sep 2026, 02:57 46 MW DEA -20.396, 126.418
29 Sep 2026, 02:37 195 MW DEA -20.416, 126.437
29 Sep 2026, 02:37 42 MW DEA -20.415, 126.456
29 Sep 2026, 02:37 189 MW DEA -20.396, 126.439

Other fires nearby

This is an unconfirmed satellite detection, not an official warning. Satellites detect heat, which may be a bushfire, a hazard-reduction burn, or industrial activity. Always check the official source and, in an emergency, call 000.

Official information for WA: Emergency WA (DFES).

Frequently asked questions

Is this a real bushfire?

Unless it is marked as matched to an official incident, this is an unconfirmed satellite detection. Satellites detect heat, which can be a bushfire, a hazard-reduction burn or an industrial source. Check the official warnings for confirmation.

What does “peak intensity (FRP)” mean?

FRP (fire radiative power, in megawatts) is how much heat the fire was giving off when a satellite detected it. The peak is the highest reading across all detections — a rough guide to how intense the fire has been.

Why are several nearby detections shown as one fire?

We group satellite detections that are close together in space and time into a single fire event, so a fire front seen across multiple passes appears as one fire rather than scattered dots.

How do I get the official information for this fire?

Follow the official source link on this page (where available) and your state fire agency. In an emergency call 000.