See the live Australia fire map

Fire near Isaac (QLD)

Satellite detection (unconfirmed)

Very intense fire near Isaac (QLD), first detected 29 Sep 2026 and last seen . It has been picked up by 44 satellite detections, peaking at 492 MW.

Status
Recent
First detected
29 Sep 2026, 04:11 UTC
Last detected
30 Sep 2026, 15:49 UTC
Duration
35.6 h
Detections
44
Peak intensity (FRP)
492 MW
Peaked at
30 Sep, 05:57 UTC
Fire footprint
3.2 km × 4.6 km
Detection sources
44 DEA
State
QLD
Confirmation
Satellite only
Data source
DEA

How this fire has evolved

Satellite detections per day and the strongest reading each day — a quick sense of when this fire flared up and when it eased. Times are UTC.

DayDetectionsPeak intensitySources
29 Sep 2026 3 34 MW DEA
30 Sep 2026 41 492 MW DEA

Satellite detections — 44 hot spots

This fire is 44 satellite heat detections merged into one event across 2 days (44 DEA). Each row is one satellite pass over a burning pixel — all of them are plotted on the map above, where the most recent detections are ringed in white. Tap any point on the map for its time and intensity, or switch on the heat map (top-right) to see where activity concentrated.

Time (UTC)IntensitySourceLatitude, Longitude
30 Sep 2026, 15:49 2 MW DEA -22.529, 148.582
30 Sep 2026, 15:49 2 MW DEA -22.529, 148.582
30 Sep 2026, 15:41 — DEA -22.526, 148.578
30 Sep 2026, 15:05 2 MW DEA -22.527, 148.584
30 Sep 2026, 15:05 2 MW DEA -22.527, 148.583
30 Sep 2026, 15:01 — DEA -22.526, 148.578
30 Sep 2026, 15:01 — DEA -22.526, 148.578
30 Sep 2026, 15:01 — DEA -22.526, 148.582
30 Sep 2026, 15:01 — DEA -22.526, 148.582
30 Sep 2026, 14:45 1 MW DEA -22.530, 148.581
30 Sep 2026, 14:45 1 MW DEA -22.531, 148.585
30 Sep 2026, 14:45 1 MW DEA -22.530, 148.581
30 Sep 2026, 14:45 1 MW DEA -22.531, 148.585
30 Sep 2026, 14:44 — DEA -22.526, 148.578
30 Sep 2026, 09:37 10 MW DEA -22.535, 148.570
30 Sep 2026, 09:27 12 MW DEA -22.535, 148.570
30 Sep 2026, 09:17 9 MW DEA -22.535, 148.570
30 Sep 2026, 09:07 10 MW DEA -22.535, 148.570
30 Sep 2026, 08:57 13 MW DEA -22.535, 148.570
30 Sep 2026, 08:47 11 MW DEA -22.535, 148.570
30 Sep 2026, 08:37 10 MW DEA -22.535, 148.570
30 Sep 2026, 08:27 12 MW DEA -22.535, 148.570
30 Sep 2026, 08:27 9 MW DEA -22.535, 148.591
30 Sep 2026, 08:07 17 MW DEA -22.535, 148.570
30 Sep 2026, 08:07 8 MW DEA -22.535, 148.591
30 Sep 2026, 06:57 26 MW DEA -22.535, 148.570
30 Sep 2026, 06:37 34 MW DEA -22.535, 148.570
30 Sep 2026, 06:37 13 MW DEA -22.556, 148.572
30 Sep 2026, 06:07 272 MW DEA -22.535, 148.570
30 Sep 2026, 06:07 21 MW DEA -22.535, 148.591
30 Sep 2026, 06:07 242 MW DEA -22.556, 148.572
30 Sep 2026, 05:57 66 MW DEA -22.515, 148.569
30 Sep 2026, 05:57 18 MW DEA -22.515, 148.590
30 Sep 2026, 05:57 492 MW DEA -22.535, 148.570
30 Sep 2026, 05:57 200 MW DEA -22.535, 148.591
30 Sep 2026, 05:57 147 MW DEA -22.556, 148.572
30 Sep 2026, 05:57 68 MW DEA -22.556, 148.592
30 Sep 2026, 05:47 118 MW DEA -22.515, 148.569
30 Sep 2026, 05:47 478 MW DEA -22.535, 148.570
30 Sep 2026, 05:47 254 MW DEA -22.535, 148.591
30 Sep 2026, 05:47 35 MW DEA -22.556, 148.572
29 Sep 2026, 06:03 34 MW DEA -22.521, 148.571
29 Sep 2026, 06:03 18 MW DEA -22.531, 148.561
29 Sep 2026, 04:11 3 MW DEA -22.521, 148.563

Other fires nearby

This is an unconfirmed satellite detection, not an official warning. Satellites detect heat, which may be a bushfire, a hazard-reduction burn, or industrial activity. Always check the official source and, in an emergency, call 000.

Official information for QLD: Queensland Fire Department.

Frequently asked questions

Is this a real bushfire?

Unless it is marked as matched to an official incident, this is an unconfirmed satellite detection. Satellites detect heat, which can be a bushfire, a hazard-reduction burn or an industrial source. Check the official warnings for confirmation.

What does “peak intensity (FRP)” mean?

FRP (fire radiative power, in megawatts) is how much heat the fire was giving off when a satellite detected it. The peak is the highest reading across all detections — a rough guide to how intense the fire has been.

Why are several nearby detections shown as one fire?

We group satellite detections that are close together in space and time into a single fire event, so a fire front seen across multiple passes appears as one fire rather than scattered dots.

How do I get the official information for this fire?

Follow the official source link on this page (where available) and your state fire agency. In an emergency call 000.