See the live Australia fire map

Fire near Murweh (QLD)

Satellite detection (unconfirmed)

Intense fire near Murweh (QLD), first detected 29 Sep 2026 and last seen . It has been picked up by 58 satellite detections, peaking at 72 MW.

Status
Recent
First detected
29 Sep 2026, 02:58 UTC
Last detected
29 Sep 2026, 06:12 UTC
Duration
3.2 h
Detections
58
Peak intensity (FRP)
72 MW
Peaked at
29 Sep, 02:58 UTC
Fire footprint
1.5 km × 1.4 km
Detection sources
58 DEA
State
QLD
Confirmation
Satellite only
Data source
DEA

Satellite detections — 58 hot spots

This fire is 58 satellite heat detections merged into one event across 1 day (58 DEA). Each row is one satellite pass over a burning pixel — all of them are plotted on the map above, where the most recent detections are ringed in white. Tap any point on the map for its time and intensity, or switch on the heat map (top-right) to see where activity concentrated.

Time (UTC)IntensitySourceLatitude, Longitude
29 Sep 2026, 06:12 7 MW DEA -27.076, 146.433
29 Sep 2026, 06:03 10 MW DEA -27.081, 146.431
29 Sep 2026, 04:54 18 MW DEA -27.080, 146.438
29 Sep 2026, 04:54 15 MW DEA -27.073, 146.435
29 Sep 2026, 04:54 18 MW DEA -27.075, 146.440
29 Sep 2026, 04:54 18 MW DEA -27.080, 146.438
29 Sep 2026, 04:54 18 MW DEA -27.080, 146.438
29 Sep 2026, 04:54 15 MW DEA -27.073, 146.435
29 Sep 2026, 04:54 18 MW DEA -27.075, 146.440
29 Sep 2026, 04:44 — DEA -27.071, 146.429
29 Sep 2026, 04:44 — DEA -27.071, 146.433
29 Sep 2026, 04:44 — DEA -27.071, 146.437
29 Sep 2026, 04:44 — DEA -27.074, 146.429
29 Sep 2026, 04:44 — DEA -27.074, 146.433
29 Sep 2026, 04:44 — DEA -27.074, 146.437
29 Sep 2026, 04:10 39 MW DEA -27.073, 146.440
29 Sep 2026, 04:10 39 MW DEA -27.075, 146.438
29 Sep 2026, 04:00 — DEA -27.074, 146.433
29 Sep 2026, 04:00 — DEA -27.074, 146.437
29 Sep 2026, 03:50 59 MW DEA -27.077, 146.437
29 Sep 2026, 03:50 29 MW DEA -27.074, 146.440
29 Sep 2026, 03:50 29 MW DEA -27.075, 146.434
29 Sep 2026, 03:50 59 MW DEA -27.077, 146.437
29 Sep 2026, 03:50 29 MW DEA -27.074, 146.440
29 Sep 2026, 03:50 29 MW DEA -27.075, 146.434
29 Sep 2026, 03:41 — DEA -27.071, 146.437
29 Sep 2026, 03:41 — DEA -27.074, 146.429
29 Sep 2026, 03:41 — DEA -27.074, 146.433
29 Sep 2026, 03:28 23 MW DEA -27.083, 146.440
29 Sep 2026, 03:18 38 MW DEA -27.083, 146.440
29 Sep 2026, 03:13 29 MW DEA -27.073, 146.443
29 Sep 2026, 03:13 33 MW DEA -27.073, 146.438
29 Sep 2026, 03:13 33 MW DEA -27.074, 146.434
29 Sep 2026, 03:13 30 MW DEA -27.074, 146.442
29 Sep 2026, 03:13 32 MW DEA -27.075, 146.438
29 Sep 2026, 03:13 32 MW DEA -27.075, 146.434
29 Sep 2026, 03:13 30 MW DEA -27.076, 146.445
29 Sep 2026, 03:13 68 MW DEA -27.076, 146.437
29 Sep 2026, 03:13 31 MW DEA -27.071, 146.444
29 Sep 2026, 03:13 65 MW DEA -27.072, 146.436
29 Sep 2026, 03:13 30 MW DEA -27.076, 146.445
29 Sep 2026, 03:13 68 MW DEA -27.076, 146.437
29 Sep 2026, 03:13 31 MW DEA -27.071, 146.444
29 Sep 2026, 03:13 65 MW DEA -27.072, 146.436
29 Sep 2026, 03:13 33 MW DEA -27.073, 146.438
29 Sep 2026, 03:13 33 MW DEA -27.074, 146.434
29 Sep 2026, 03:13 32 MW DEA -27.075, 146.438
29 Sep 2026, 03:13 32 MW DEA -27.075, 146.434
29 Sep 2026, 03:08 60 MW DEA -27.083, 146.440
29 Sep 2026, 03:04 — DEA -27.071, 146.429
29 Sep 2026, 03:04 — DEA -27.071, 146.433
29 Sep 2026, 03:04 — DEA -27.071, 146.437
29 Sep 2026, 03:04 — DEA -27.071, 146.441
29 Sep 2026, 03:04 — DEA -27.074, 146.429
29 Sep 2026, 03:04 — DEA -27.074, 146.433
29 Sep 2026, 03:04 — DEA -27.074, 146.437
29 Sep 2026, 03:04 — DEA -27.074, 146.441
29 Sep 2026, 02:58 72 MW DEA -27.083, 146.440

This is an unconfirmed satellite detection, not an official warning. Satellites detect heat, which may be a bushfire, a hazard-reduction burn, or industrial activity. Always check the official source and, in an emergency, call 000.

Official information for QLD: Queensland Fire Department.

Frequently asked questions

Is this a real bushfire?

Unless it is marked as matched to an official incident, this is an unconfirmed satellite detection. Satellites detect heat, which can be a bushfire, a hazard-reduction burn or an industrial source. Check the official warnings for confirmation.

What does “peak intensity (FRP)” mean?

FRP (fire radiative power, in megawatts) is how much heat the fire was giving off when a satellite detected it. The peak is the highest reading across all detections — a rough guide to how intense the fire has been.

Why are several nearby detections shown as one fire?

We group satellite detections that are close together in space and time into a single fire event, so a fire front seen across multiple passes appears as one fire rather than scattered dots.

How do I get the official information for this fire?

Follow the official source link on this page (where available) and your state fire agency. In an emergency call 000.