See the live Australia fire map

Fire near Charters Towers (QLD)

Satellite detection (unconfirmed)

Lower intensity fire near Charters Towers (QLD), first detected 29 Sep 2026 and last seen . It has been picked up by 47 satellite detections, peaking at 20 MW.

Status
Recent
First detected
29 Sep 2026, 03:04 UTC
Last detected
30 Sep 2026, 03:54 UTC
Duration
24.8 h
Detections
47
Peak intensity (FRP)
20 MW
Peaked at
29 Sep, 04:11 UTC
Fire footprint
1.3 km × 1.1 km
Detection sources
47 DEA
State
QLD
Confirmation
Satellite only
Data source
DEA

How this fire has evolved

Satellite detections per day and the strongest reading each day — a quick sense of when this fire flared up and when it eased. Times are UTC.

DayDetectionsPeak intensitySources
29 Sep 2026 40 20 MW DEA
30 Sep 2026 7 12 MW DEA

Satellite detections — 47 hot spots

This fire is 47 satellite heat detections merged into one event across 2 days (47 DEA). Each row is one satellite pass over a burning pixel — all of them are plotted on the map above, where the most recent detections are ringed in white. Tap any point on the map for its time and intensity, or switch on the heat map (top-right) to see where activity concentrated.

Time (UTC)IntensitySourceLatitude, Longitude
30 Sep 2026, 03:54 5 MW DEA -18.657, 145.601
30 Sep 2026, 03:54 12 MW DEA -18.658, 145.593
30 Sep 2026, 03:54 5 MW DEA -18.659, 145.599
30 Sep 2026, 03:54 6 MW DEA -18.659, 145.595
30 Sep 2026, 03:54 6 MW DEA -18.656, 145.595
30 Sep 2026, 03:47 — DEA -18.656, 145.593
30 Sep 2026, 03:47 — DEA -18.656, 145.597
29 Sep 2026, 06:15 6 MW DEA -18.662, 145.598
29 Sep 2026, 06:15 10 MW DEA -18.664, 145.589
29 Sep 2026, 06:15 9 MW DEA -18.655, 145.588
29 Sep 2026, 06:03 14 MW DEA -18.661, 145.591
29 Sep 2026, 04:11 18 MW DEA -18.662, 145.594
29 Sep 2026, 04:11 20 MW DEA -18.663, 145.595
29 Sep 2026, 04:11 6 MW DEA -18.663, 145.597
29 Sep 2026, 04:11 6 MW DEA -18.659, 145.596
29 Sep 2026, 04:11 6 MW DEA -18.660, 145.592
29 Sep 2026, 04:11 10 MW DEA -18.661, 145.597
29 Sep 2026, 04:11 10 MW DEA -18.662, 145.593
29 Sep 2026, 04:00 — DEA -18.659, 145.589
29 Sep 2026, 04:00 — DEA -18.659, 145.593
29 Sep 2026, 04:00 — DEA -18.663, 145.593
29 Sep 2026, 03:53 7 MW DEA -18.662, 145.600
29 Sep 2026, 03:53 8 MW DEA -18.663, 145.591
29 Sep 2026, 03:53 13 MW DEA -18.660, 145.592
29 Sep 2026, 03:53 7 MW DEA -18.661, 145.597
29 Sep 2026, 03:53 9 MW DEA -18.661, 145.593
29 Sep 2026, 03:53 14 MW DEA -18.662, 145.594
29 Sep 2026, 03:53 7 MW DEA -18.662, 145.600
29 Sep 2026, 03:53 8 MW DEA -18.663, 145.591
29 Sep 2026, 03:53 13 MW DEA -18.660, 145.592
29 Sep 2026, 03:53 7 MW DEA -18.661, 145.597
29 Sep 2026, 03:53 9 MW DEA -18.661, 145.593
29 Sep 2026, 03:41 — DEA -18.659, 145.589
29 Sep 2026, 03:41 — DEA -18.659, 145.593
29 Sep 2026, 03:16 7 MW DEA -18.660, 145.597
29 Sep 2026, 03:16 7 MW DEA -18.662, 145.598
29 Sep 2026, 03:16 7 MW DEA -18.662, 145.599
29 Sep 2026, 03:16 6 MW DEA -18.663, 145.592
29 Sep 2026, 03:16 7 MW DEA -18.664, 145.600
29 Sep 2026, 03:16 7 MW DEA -18.665, 145.593
29 Sep 2026, 03:16 7 MW DEA -18.662, 145.599
29 Sep 2026, 03:16 6 MW DEA -18.663, 145.592
29 Sep 2026, 03:16 7 MW DEA -18.664, 145.600
29 Sep 2026, 03:16 7 MW DEA -18.665, 145.593
29 Sep 2026, 03:16 7 MW DEA -18.660, 145.597
29 Sep 2026, 03:16 7 MW DEA -18.662, 145.598
29 Sep 2026, 03:04 — DEA -18.659, 145.593

Other fires nearby

This is an unconfirmed satellite detection, not an official warning. Satellites detect heat, which may be a bushfire, a hazard-reduction burn, or industrial activity. Always check the official source and, in an emergency, call 000.

Official information for QLD: Queensland Fire Department.

Frequently asked questions

Is this a real bushfire?

Unless it is marked as matched to an official incident, this is an unconfirmed satellite detection. Satellites detect heat, which can be a bushfire, a hazard-reduction burn or an industrial source. Check the official warnings for confirmation.

What does “peak intensity (FRP)” mean?

FRP (fire radiative power, in megawatts) is how much heat the fire was giving off when a satellite detected it. The peak is the highest reading across all detections — a rough guide to how intense the fire has been.

Why are several nearby detections shown as one fire?

We group satellite detections that are close together in space and time into a single fire event, so a fire front seen across multiple passes appears as one fire rather than scattered dots.

How do I get the official information for this fire?

Follow the official source link on this page (where available) and your state fire agency. In an emergency call 000.