Fire near Lithgow (NSW)
Near an official incident
Lower intensity fire near Lithgow (NSW), first detected 29 Sep 2026 and last seen . It has been picked up by 38 satellite detections, peaking at 45 MW.
- Status
- Recent
- First detected
- 29 Sep 2026, 03:04 UTC
- Last detected
- 29 Sep 2026, 06:10 UTC
- Duration
- 3.1 h
- Detections
- 38
- Peak intensity (FRP)
- 45 MW
- Peaked at
- 29 Sep, 03:49 UTC
- Fire footprint
- 0.7 km × 1.3 km
- Detection sources
- 38 DEA
- State
- NSW
- Confirmation
- Official
- Data source
- DEA
Official incident details
- Warning level
- Planned burn
- Type
- Hazard Reduction
- Status
- Under control
- Reported size
- 74 ha
- Agency
- NSW RFS
- Updated
LOCATION: TURON GULLY RD, CAPERTEE 2846
COUNCIL AREA: Lithgow
STATUS: Under control
TYPE: Hazard Reduction
FIRE: Yes
SIZE: 74 ha
RESPONSIBLE AGENCY: Rural Fire Service
UPDATED: 1 Oct 2026 19:12
Crew, appliance and aircraft numbers aren't published in Australia's open incident feeds, so we can't list firefighters here — follow the official source above for operational detail.
Satellite detections — 38 hot spots
This fire is 38 satellite heat detections merged into one event across 1 day (38 DEA). Each row is one satellite pass over a burning pixel — all of them are plotted on the map above, where the most recent detections are ringed in white. Tap any point on the map for its time and intensity, or switch on the heat map (top-right) to see where activity concentrated.
| Time (UTC) | Intensity | Source | Latitude, Longitude |
|---|---|---|---|
| 29 Sep 2026, 06:10 | 6 MW | DEA | -33.154, 149.983 |
| 29 Sep 2026, 04:51 | 14 MW | DEA | -33.151, 149.982 |
| 29 Sep 2026, 04:51 | 14 MW | DEA | -33.151, 149.982 |
| 29 Sep 2026, 04:44 | — | DEA | -33.146, 149.981 |
| 29 Sep 2026, 04:44 | — | DEA | -33.149, 149.977 |
| 29 Sep 2026, 04:44 | — | DEA | -33.149, 149.981 |
| 29 Sep 2026, 04:08 | 25 MW | DEA | -33.158, 149.979 |
| 29 Sep 2026, 04:08 | 17 MW | DEA | -33.151, 149.977 |
| 29 Sep 2026, 04:08 | 26 MW | DEA | -33.155, 149.981 |
| 29 Sep 2026, 04:08 | 17 MW | DEA | -33.152, 149.980 |
| 29 Sep 2026, 04:00 | — | DEA | -33.149, 149.977 |
| 29 Sep 2026, 04:00 | — | DEA | -33.153, 149.977 |
| 29 Sep 2026, 04:00 | — | DEA | -33.153, 149.981 |
| 29 Sep 2026, 03:49 | 45 MW | DEA | -33.154, 149.983 |
| 29 Sep 2026, 03:49 | 9 MW | DEA | -33.147, 149.981 |
| 29 Sep 2026, 03:49 | 15 MW | DEA | -33.156, 149.981 |
| 29 Sep 2026, 03:49 | 15 MW | DEA | -33.152, 149.985 |
| 29 Sep 2026, 03:49 | 15 MW | DEA | -33.153, 149.980 |
| 29 Sep 2026, 03:49 | 9 MW | DEA | -33.149, 149.979 |
| 29 Sep 2026, 03:49 | 45 MW | DEA | -33.154, 149.983 |
| 29 Sep 2026, 03:49 | 9 MW | DEA | -33.147, 149.981 |
| 29 Sep 2026, 03:49 | 15 MW | DEA | -33.156, 149.981 |
| 29 Sep 2026, 03:49 | 15 MW | DEA | -33.152, 149.985 |
| 29 Sep 2026, 03:49 | 15 MW | DEA | -33.153, 149.980 |
| 29 Sep 2026, 03:49 | 9 MW | DEA | -33.149, 149.979 |
| 29 Sep 2026, 03:41 | — | DEA | -33.149, 149.977 |
| 29 Sep 2026, 03:41 | — | DEA | -33.149, 149.981 |
| 29 Sep 2026, 03:41 | — | DEA | -33.153, 149.977 |
| 29 Sep 2026, 03:12 | 21 MW | DEA | -33.156, 149.982 |
| 29 Sep 2026, 03:12 | 21 MW | DEA | -33.151, 149.981 |
| 29 Sep 2026, 03:12 | 44 MW | DEA | -33.153, 149.979 |
| 29 Sep 2026, 03:12 | 44 MW | DEA | -33.153, 149.979 |
| 29 Sep 2026, 03:12 | 21 MW | DEA | -33.156, 149.982 |
| 29 Sep 2026, 03:12 | 21 MW | DEA | -33.151, 149.981 |
| 29 Sep 2026, 03:04 | — | DEA | -33.149, 149.977 |
| 29 Sep 2026, 03:04 | — | DEA | -33.149, 149.981 |
| 29 Sep 2026, 03:04 | — | DEA | -33.153, 149.977 |
| 29 Sep 2026, 03:04 | — | DEA | -33.153, 149.981 |
This satellite fire has been matched to an official incident (see the warning above). The official advice is the authority — always follow your fire agency, and in an emergency call 000.
Official information for NSW: NSW Rural Fire Service.
Get alerts for this fire · All current fires
Frequently asked questions
Is this a real bushfire?
Unless it is marked as matched to an official incident, this is an unconfirmed satellite detection. Satellites detect heat, which can be a bushfire, a hazard-reduction burn or an industrial source. Check the official warnings for confirmation.
What does “peak intensity (FRP)” mean?
FRP (fire radiative power, in megawatts) is how much heat the fire was giving off when a satellite detected it. The peak is the highest reading across all detections — a rough guide to how intense the fire has been.
Why are several nearby detections shown as one fire?
We group satellite detections that are close together in space and time into a single fire event, so a fire front seen across multiple passes appears as one fire rather than scattered dots.
How do I get the official information for this fire?
Follow the official source link on this page (where available) and your state fire agency. In an emergency call 000.