Fire near Denmark (WA)
Confirmed by official incident
Intense fire near Denmark (WA), first detected 16 Nov 2026 and last seen . It has been picked up by 19 satellite detections, peaking at 81 MW.
- Status
- Active
- First detected
- 16 Nov 2026, 06:33 UTC
- Last detected
- 17 Nov 2026, 07:43 UTC
- Duration
- 25.2 h
- Detections
- 19
- Peak intensity (FRP)
- 81 MW
- Peaked at
- 16 Nov, 06:33 UTC
- Fire footprint
- 9.0 km × 4.6 km
- Detection sources
- 19 DEA
- State
- WA
- Confirmation
- Official
- Data source
- DEA
Official incident details
- Warning level
- Advice
- Type
- Bushfire
- Agency
- DFES
- Updated
the Parks and Wildlife Service at the Department of Biodiversity, Conservation and Attractions.
Please note changes under Bushfire behaviour and What firefighters are doing sections.
Time of issue:
03:43 PM
Date of issue:
17 Nov 2026
Bushfire Advice - AVOID THE AREA - WALPOLE NORNALUP NATIONAL PARK
A Bushfire Advice is in place for people south of Ficifolia Road and Conspicuous Cliffs Road, and west of Peaceful Bay Road in WALPOLE NORNALUP NATIONAL PARK in parts of NORNALUP and PEACEFUL BAY in the SHIRE OF DENMARK.
There is no threat to lives or homes.
WHAT TO DO
Stay alert and monitor your surroundings.Read through your plan and decide what you will do if the situation gets worse. If you do not have a plan, make one now on Emergency WA, or in the Emergency WA app.Watch for signs of a bushfire, especially smoke and flames.Close all doors and windows, and turn off evaporative air conditioners but keep water running through the system if possible.If you have a respiratory condition and you have been affected by smoke you should contact your local doctor or call 1800MEDICARE (1800 633 422).If drivingTurn your headlights on and drive slowly.Watch for emergency services personnel and follow their directions.If you cannot see clearly, pull over, keep your headlights and hazard lights on, and wait until the smoke clears.If you have a respiratory condition and you have been affected by smoke you should contact your local doctor or call 1800MEDICARE (1800 633 422).
BUSHFIRE BEHAVIOUR
The bushfire is stationary.
It is contained and under control.
ROAD CLOSURES AND CONDITIONS
Some tracks may be closed.
Motorists are asked to avoid the area, reduce speed and drive carefully. Road information may also be available from Main Roads WA by visiting the Main Roads Travel Map, calling 138 138 or by contacting your Local Government Authority.
WHAT FIREFIGHTERS ARE DOING
Firefighters are patrolling the area.
DRONES AND AERIAL SUPPORT
Never fly a drone, model aircraft or multirotor near bushfires. Doing so poses a major safety risk to firefighting personnel in the air and on the ground, and forces aircraft to be grounded or redirected, hindering firefighting efforts.
PARK CLOSURES
The Bibbulmun Track is closed for 9.1km from Rame Head Road until Peaceful Bay. There is a 4km diversion in place along Rame Head Road to Peaceful Bay.For more information, please see the Department of Biodiversity, Conservation and Attractions' Park Alerts website.
EXTRA INFORMATION
Parks and Wildlife Service is managing the fire.
The incident was reported at 02:41 PM on 16 November 2026.The cause of the incident is suspected deliberate. People are asked to report any suspicious behaviour to Crime Stoppers on 1800 333 000.
KEEP UP TO DATE
Visit Emergency WA or download the Emergency WA app from the App Store or Google Play.Call 13 DFES (13 3337).Follow DFES on Facebook.Listen to ABC Local Radio or news bulletins.During a power outage, your home phone, computer or other electronic devices connected to the NBN will not work. Include a battery powered radio in your emergency kit.
The next update will be provided by 11am tomorrow unless the situation changes.
END
Media Contact: DBCA Media on 9219 9999.
Crew, appliance and aircraft numbers aren't published in Australia's open incident feeds, so we can't list firefighters here — follow the official source above for operational detail.
Satellite detections — 19 hot spots
This fire is 19 satellite heat detections merged into one event across 1 day (19 DEA). Each row is one satellite pass over a burning pixel — all of them are plotted on the map above, where the most recent detections are ringed in white. Tap any point on the map for its time and intensity, or switch on the heat map (top-right) to see where activity concentrated.
| Time (UTC) | Intensity | Source | Latitude, Longitude |
|---|---|---|---|
| 16 Nov 2026, 12:48 | 14 MW | DEA | -35.031, 116.910 |
| 16 Nov 2026, 12:38 | 11 MW | DEA | -35.029, 116.937 |
| 16 Nov 2026, 12:38 | 52 MW | DEA | -35.031, 116.910 |
| 16 Nov 2026, 12:08 | 21 MW | DEA | -35.029, 116.937 |
| 16 Nov 2026, 12:08 | 24 MW | DEA | -35.031, 116.910 |
| 16 Nov 2026, 11:58 | 21 MW | DEA | -35.029, 116.937 |
| 16 Nov 2026, 11:58 | 36 MW | DEA | -35.031, 116.910 |
| 16 Nov 2026, 09:18 | 13 MW | DEA | -35.031, 116.910 |
| 16 Nov 2026, 08:38 | 18 MW | DEA | -35.031, 116.910 |
| 16 Nov 2026, 08:28 | 28 MW | DEA | -35.031, 116.910 |
| 16 Nov 2026, 08:18 | 16 MW | DEA | -35.032, 116.884 |
| 16 Nov 2026, 08:18 | 72 MW | DEA | -35.031, 116.910 |
| 16 Nov 2026, 08:08 | 38 MW | DEA | -35.031, 116.910 |
| 16 Nov 2026, 07:58 | 23 MW | DEA | -35.031, 116.910 |
| 16 Nov 2026, 06:48 | 27 MW | DEA | -35.031, 116.910 |
| 16 Nov 2026, 06:33 | 81 MW | DEA | -35.059, 116.921 |
| 16 Nov 2026, 06:33 | 10 MW | DEA | -35.054, 116.919 |
| 16 Nov 2026, 06:33 | 81 MW | DEA | -35.059, 116.921 |
| 16 Nov 2026, 06:33 | 10 MW | DEA | -35.054, 116.919 |
Other fires nearby
This satellite fire has been matched to an official incident (see the warning above). The official advice is the authority — always follow your fire agency, and in an emergency call 000.
Official information for WA: Emergency WA (DFES).
Get alerts for this fire · All current fires
Frequently asked questions
Is this a real bushfire?
Unless it is marked as matched to an official incident, this is an unconfirmed satellite detection. Satellites detect heat, which can be a bushfire, a hazard-reduction burn or an industrial source. Check the official warnings for confirmation.
What does “peak intensity (FRP)” mean?
FRP (fire radiative power, in megawatts) is how much heat the fire was giving off when a satellite detected it. The peak is the highest reading across all detections — a rough guide to how intense the fire has been.
Why are several nearby detections shown as one fire?
We group satellite detections that are close together in space and time into a single fire event, so a fire front seen across multiple passes appears as one fire rather than scattered dots.
How do I get the official information for this fire?
Follow the official source link on this page (where available) and your state fire agency. In an emergency call 000.