See the live Australia fire map

Fire near Wyndham-East Kimberley (WA)

Satellite detection (unconfirmed)

Lower intensity fire near Wyndham-East Kimberley (WA), first detected 16 Nov 2026 and last seen . It has been picked up by 46 satellite detections, peaking at 42 MW.

Status
Active
First detected
16 Nov 2026, 15:59 UTC
Last detected
17 Nov 2026, 01:27 UTC
Duration
9.5 h
Detections
46
Peak intensity (FRP)
42 MW
Peaked at
17 Nov, 01:27 UTC
Fire footprint
2.2 km × 2.2 km
Detection sources
46 DEA
State
WA
Confirmation
Satellite only
Data source
DEA

How this fire has evolved

Satellite detections per day and the strongest reading each day — a quick sense of when this fire flared up and when it eased. Times are UTC.

DayDetectionsPeak intensitySources
16 Nov 2026 45 20 MW DEA
17 Nov 2026 1 42 MW DEA

Satellite detections — 46 hot spots

This fire is 46 satellite heat detections merged into one event across 2 days (46 DEA). Each row is one satellite pass over a burning pixel — all of them are plotted on the map above, where the most recent detections are ringed in white. Tap any point on the map for its time and intensity, or switch on the heat map (top-right) to see where activity concentrated.

Time (UTC)IntensitySourceLatitude, Longitude
17 Nov 2026, 01:27 42 MW DEA -15.687, 128.295
16 Nov 2026, 17:03 9 MW DEA -15.703, 128.311
16 Nov 2026, 17:03 1 MW DEA -15.686, 128.316
16 Nov 2026, 17:03 1 MW DEA -15.690, 128.310
16 Nov 2026, 17:03 1 MW DEA -15.690, 128.315
16 Nov 2026, 17:03 2 MW DEA -15.693, 128.310
16 Nov 2026, 17:03 2 MW DEA -15.698, 128.314
16 Nov 2026, 17:03 2 MW DEA -15.697, 128.309
16 Nov 2026, 17:03 6 MW DEA -15.701, 128.309
16 Nov 2026, 17:03 6 MW DEA -15.701, 128.314
16 Nov 2026, 17:03 9 MW DEA -15.703, 128.311
16 Nov 2026, 17:03 1 MW DEA -15.686, 128.316
16 Nov 2026, 17:03 1 MW DEA -15.690, 128.310
16 Nov 2026, 17:03 1 MW DEA -15.690, 128.315
16 Nov 2026, 17:03 2 MW DEA -15.693, 128.310
16 Nov 2026, 17:03 2 MW DEA -15.698, 128.314
16 Nov 2026, 17:03 2 MW DEA -15.697, 128.309
16 Nov 2026, 17:03 6 MW DEA -15.701, 128.309
16 Nov 2026, 17:03 6 MW DEA -15.701, 128.314
16 Nov 2026, 16:56 — DEA -15.689, 128.306
16 Nov 2026, 16:56 — DEA -15.693, 128.306
16 Nov 2026, 16:56 — DEA -15.693, 128.309
16 Nov 2026, 16:56 — DEA -15.697, 128.309
16 Nov 2026, 16:56 — DEA -15.701, 128.306
16 Nov 2026, 16:37 20 MW DEA -15.706, 128.314
16 Nov 2026, 16:06 6 MW DEA -15.695, 128.306
16 Nov 2026, 16:06 5 MW DEA -15.697, 128.312
16 Nov 2026, 16:06 6 MW DEA -15.700, 128.308
16 Nov 2026, 16:06 3 MW DEA -15.693, 128.308
16 Nov 2026, 16:06 3 MW DEA -15.694, 128.311
16 Nov 2026, 16:06 3 MW DEA -15.698, 128.307
16 Nov 2026, 16:06 3 MW DEA -15.699, 128.310
16 Nov 2026, 16:06 3 MW DEA -15.697, 128.307
16 Nov 2026, 16:06 3 MW DEA -15.698, 128.310
16 Nov 2026, 16:06 6 MW DEA -15.695, 128.306
16 Nov 2026, 16:06 5 MW DEA -15.697, 128.312
16 Nov 2026, 16:06 6 MW DEA -15.700, 128.308
16 Nov 2026, 16:06 3 MW DEA -15.693, 128.308
16 Nov 2026, 16:06 3 MW DEA -15.694, 128.311
16 Nov 2026, 16:06 3 MW DEA -15.698, 128.307
16 Nov 2026, 16:06 3 MW DEA -15.699, 128.310
16 Nov 2026, 16:06 3 MW DEA -15.697, 128.307
16 Nov 2026, 16:06 3 MW DEA -15.698, 128.310
16 Nov 2026, 15:59 — DEA -15.693, 128.302
16 Nov 2026, 15:59 — DEA -15.697, 128.302
16 Nov 2026, 15:59 — DEA -15.697, 128.306

Other fires nearby

This is an unconfirmed satellite detection, not an official warning. Satellites detect heat, which may be a bushfire, a hazard-reduction burn, or industrial activity. Always check the official source and, in an emergency, call 000.

Official information for WA: Emergency WA (DFES).

Frequently asked questions

Is this a real bushfire?

Unless it is marked as matched to an official incident, this is an unconfirmed satellite detection. Satellites detect heat, which can be a bushfire, a hazard-reduction burn or an industrial source. Check the official warnings for confirmation.

What does “peak intensity (FRP)” mean?

FRP (fire radiative power, in megawatts) is how much heat the fire was giving off when a satellite detected it. The peak is the highest reading across all detections — a rough guide to how intense the fire has been.

Why are several nearby detections shown as one fire?

We group satellite detections that are close together in space and time into a single fire event, so a fire front seen across multiple passes appears as one fire rather than scattered dots.

How do I get the official information for this fire?

Follow the official source link on this page (where available) and your state fire agency. In an emergency call 000.