See the live Australia fire map

Fire near Derby-West Kimberley (WA)

Satellite detection (unconfirmed)

Very intense fire near Derby-West Kimberley (WA), first detected 15 Nov 2026 and last seen . It has been picked up by 52 satellite detections, peaking at 336 MW.

Status
Recent
First detected
15 Nov 2026, 01:37 UTC
Last detected
15 Nov 2026, 16:07 UTC
Duration
14.5 h
Detections
52
Peak intensity (FRP)
336 MW
Peaked at
15 Nov, 08:47 UTC
Fire footprint
3.8 km × 3.1 km
Detection sources
52 DEA
State
WA
Confirmation
Satellite only
Data source
DEA

Satellite detections — 52 hot spots

This fire is 52 satellite heat detections merged into one event across 1 day (52 DEA). Each row is one satellite pass over a burning pixel — all of them are plotted on the map above, where the most recent detections are ringed in white. Tap any point on the map for its time and intensity, or switch on the heat map (top-right) to see where activity concentrated.

Time (UTC)IntensitySourceLatitude, Longitude
15 Nov 2026, 16:07 29 MW DEA -19.104, 123.872
15 Nov 2026, 15:57 23 MW DEA -19.104, 123.872
15 Nov 2026, 15:47 13 MW DEA -19.104, 123.872
15 Nov 2026, 14:27 13 MW DEA -19.104, 123.872
15 Nov 2026, 12:07 89 MW DEA -19.104, 123.872
15 Nov 2026, 11:57 15 MW DEA -19.104, 123.872
15 Nov 2026, 11:47 21 MW DEA -19.104, 123.872
15 Nov 2026, 11:37 17 MW DEA -19.104, 123.872
15 Nov 2026, 10:37 13 MW DEA -19.124, 123.849
15 Nov 2026, 10:37 15 MW DEA -19.123, 123.869
15 Nov 2026, 10:37 15 MW DEA -19.104, 123.872
15 Nov 2026, 10:27 16 MW DEA -19.124, 123.849
15 Nov 2026, 10:27 29 MW DEA -19.104, 123.852
15 Nov 2026, 10:27 25 MW DEA -19.104, 123.872
15 Nov 2026, 10:17 32 MW DEA -19.124, 123.849
15 Nov 2026, 10:17 26 MW DEA -19.123, 123.869
15 Nov 2026, 10:17 20 MW DEA -19.104, 123.852
15 Nov 2026, 10:17 33 MW DEA -19.104, 123.872
15 Nov 2026, 10:07 87 MW DEA -19.124, 123.849
15 Nov 2026, 10:07 132 MW DEA -19.123, 123.869
15 Nov 2026, 10:07 87 MW DEA -19.104, 123.852
15 Nov 2026, 10:07 165 MW DEA -19.104, 123.872
15 Nov 2026, 09:57 44 MW DEA -19.124, 123.849
15 Nov 2026, 09:57 28 MW DEA -19.123, 123.869
15 Nov 2026, 09:57 71 MW DEA -19.104, 123.852
15 Nov 2026, 09:17 18 MW DEA -19.104, 123.872
15 Nov 2026, 09:07 26 MW DEA -19.104, 123.872
15 Nov 2026, 08:57 66 MW DEA -19.104, 123.872
15 Nov 2026, 08:47 336 MW DEA -19.104, 123.872
15 Nov 2026, 08:47 20 MW DEA -19.123, 123.869
15 Nov 2026, 08:17 61 MW DEA -19.104, 123.872
15 Nov 2026, 08:07 108 MW DEA -19.123, 123.869
15 Nov 2026, 08:07 28 MW DEA -19.104, 123.852
15 Nov 2026, 08:07 272 MW DEA -19.104, 123.872
15 Nov 2026, 07:47 118 MW DEA -19.104, 123.872
15 Nov 2026, 07:47 77 MW DEA -19.123, 123.869
15 Nov 2026, 06:13 28 MW DEA -19.131, 123.874
15 Nov 2026, 06:13 40 MW DEA -19.128, 123.875
15 Nov 2026, 06:13 28 MW DEA -19.131, 123.874
15 Nov 2026, 06:02 — DEA -19.128, 123.869
15 Nov 2026, 05:17 58 MW DEA -19.104, 123.872
15 Nov 2026, 05:17 227 MW DEA -19.123, 123.869
15 Nov 2026, 05:15 42 MW DEA -19.121, 123.883
15 Nov 2026, 05:15 59 MW DEA -19.119, 123.884
15 Nov 2026, 05:15 303 MW DEA -19.116, 123.884
15 Nov 2026, 05:15 42 MW DEA -19.121, 123.883
15 Nov 2026, 05:15 59 MW DEA -19.119, 123.884
15 Nov 2026, 05:07 50 MW DEA -19.123, 123.869
15 Nov 2026, 04:32 12 MW DEA -19.126, 123.878
15 Nov 2026, 04:32 12 MW DEA -19.126, 123.878
15 Nov 2026, 04:32 12 MW DEA -19.126, 123.878
15 Nov 2026, 01:37 85 MW DEA -19.123, 123.869

Other fires nearby

This is an unconfirmed satellite detection, not an official warning. Satellites detect heat, which may be a bushfire, a hazard-reduction burn, or industrial activity. Always check the official source and, in an emergency, call 000.

Official information for WA: Emergency WA (DFES).

Frequently asked questions

Is this a real bushfire?

Unless it is marked as matched to an official incident, this is an unconfirmed satellite detection. Satellites detect heat, which can be a bushfire, a hazard-reduction burn or an industrial source. Check the official warnings for confirmation.

What does “peak intensity (FRP)” mean?

FRP (fire radiative power, in megawatts) is how much heat the fire was giving off when a satellite detected it. The peak is the highest reading across all detections — a rough guide to how intense the fire has been.

Why are several nearby detections shown as one fire?

We group satellite detections that are close together in space and time into a single fire event, so a fire front seen across multiple passes appears as one fire rather than scattered dots.

How do I get the official information for this fire?

Follow the official source link on this page (where available) and your state fire agency. In an emergency call 000.