See the live Australia fire map

Fire near Hope Vale (QLD)

Confirmed by official incident

Official warning: Advice (FIRE VEGETATION) — QFD · official source

Lower intensity fire near Hope Vale (QLD), first detected 15 Nov 2026 and last seen . It has been picked up by 43 satellite detections, peaking at 9 MW.

Status
Active
First detected
15 Nov 2026, 15:35 UTC
Last detected
18 Nov 2026, 00:20 UTC
Duration
56.8 h
Detections
43
Peak intensity (FRP)
9 MW
Peaked at
17 Nov, 03:55 UTC
Fire footprint
10 km × 5.6 km
Detection sources
38 DEA, 5 FIRMS
State
QLD
Confirmation
Official
Data source
DEA,FIRMS

How this fire has evolved

Satellite detections per day and the strongest reading each day — a quick sense of when this fire flared up and when it eased. Times are UTC.

DayDetectionsPeak intensitySources
15 Nov 2026 21 5 MW DEA
16 Nov 2026 4 8 MW DEA
17 Nov 2026 18 9 MW DEA, FIRMS

Official incident details

Warning level
Advice
Type
Fire
Status
FIRE VEGETATION
Agency
QFD
Updated
Official advice (verbatim):
Avoid Smoke

Official source ↗

Crew, appliance and aircraft numbers aren't published in Australia's open incident feeds, so we can't list firefighters here — follow the official source above for operational detail.

Satellite detections — 43 hot spots

This fire is 43 satellite heat detections merged into one event across 3 days (38 DEA, 5 FIRMS). Each row is one satellite pass over a burning pixel — all of them are plotted on the map above, where the most recent detections are ringed in white. Tap any point on the map for its time and intensity, or switch on the heat map (top-right) to see where activity concentrated.

Time (UTC)IntensitySourceLatitude, Longitude
17 Nov 2026, 15:48 2 MW FIRMS -15.329, 145.168
17 Nov 2026, 15:48 2 MW FIRMS -15.326, 145.168
17 Nov 2026, 15:47 2 MW DEA -15.326, 145.168
17 Nov 2026, 15:47 2 MW DEA -15.330, 145.168
17 Nov 2026, 15:47 2 MW DEA -15.326, 145.168
17 Nov 2026, 15:47 2 MW DEA -15.330, 145.168
17 Nov 2026, 15:41 — DEA -15.326, 145.166
17 Nov 2026, 03:55 3 MW FIRMS -15.328, 145.167
17 Nov 2026, 03:55 9 MW FIRMS -15.321, 145.166
17 Nov 2026, 03:55 3 MW FIRMS -15.318, 145.165
17 Nov 2026, 03:54 9 MW DEA -15.323, 145.167
17 Nov 2026, 03:54 3 MW DEA -15.329, 145.166
17 Nov 2026, 03:54 9 MW DEA -15.322, 145.165
17 Nov 2026, 03:54 3 MW DEA -15.318, 145.164
17 Nov 2026, 03:54 9 MW DEA -15.323, 145.167
17 Nov 2026, 03:54 3 MW DEA -15.329, 145.166
17 Nov 2026, 03:54 9 MW DEA -15.322, 145.165
17 Nov 2026, 03:54 3 MW DEA -15.318, 145.164
16 Nov 2026, 04:13 8 MW DEA -15.321, 145.159
16 Nov 2026, 04:13 8 MW DEA -15.321, 145.159
16 Nov 2026, 04:01 — DEA -15.318, 145.154
16 Nov 2026, 04:01 — DEA -15.318, 145.158
15 Nov 2026, 15:41 5 MW DEA -15.318, 145.134
15 Nov 2026, 15:41 2 MW DEA -15.316, 145.133
15 Nov 2026, 15:41 2 MW DEA -15.317, 145.136
15 Nov 2026, 15:41 2 MW DEA -15.320, 145.132
15 Nov 2026, 15:41 1 MW DEA -15.323, 145.132
15 Nov 2026, 15:41 5 MW DEA -15.318, 145.134
15 Nov 2026, 15:41 2 MW DEA -15.316, 145.133
15 Nov 2026, 15:41 2 MW DEA -15.317, 145.136
15 Nov 2026, 15:41 2 MW DEA -15.320, 145.132
15 Nov 2026, 15:41 1 MW DEA -15.323, 145.132
15 Nov 2026, 15:41 1 MW DEA -15.320, 145.158
15 Nov 2026, 15:41 1 MW DEA -15.321, 145.161
15 Nov 2026, 15:41 2 MW DEA -15.328, 145.164
15 Nov 2026, 15:41 1 MW DEA -15.320, 145.158
15 Nov 2026, 15:41 1 MW DEA -15.321, 145.161
15 Nov 2026, 15:41 2 MW DEA -15.328, 145.164
15 Nov 2026, 15:35 — DEA -15.314, 145.128
15 Nov 2026, 15:35 — DEA -15.314, 145.132
15 Nov 2026, 15:35 — DEA -15.318, 145.128
15 Nov 2026, 15:35 — DEA -15.318, 145.154
15 Nov 2026, 15:35 — DEA -15.326, 145.162

Other fires nearby

This satellite fire has been matched to an official incident (see the warning above). The official advice is the authority — always follow your fire agency, and in an emergency call 000.

Official information for QLD: Queensland Fire Department.

Frequently asked questions

Is this a real bushfire?

Unless it is marked as matched to an official incident, this is an unconfirmed satellite detection. Satellites detect heat, which can be a bushfire, a hazard-reduction burn or an industrial source. Check the official warnings for confirmation.

What does “peak intensity (FRP)” mean?

FRP (fire radiative power, in megawatts) is how much heat the fire was giving off when a satellite detected it. The peak is the highest reading across all detections — a rough guide to how intense the fire has been.

Why are several nearby detections shown as one fire?

We group satellite detections that are close together in space and time into a single fire event, so a fire front seen across multiple passes appears as one fire rather than scattered dots.

How do I get the official information for this fire?

Follow the official source link on this page (where available) and your state fire agency. In an emergency call 000.