See the live Australia fire map

Fire near Western Downs (QLD)

Satellite detection (unconfirmed)

Lower intensity fire near Western Downs (QLD), first detected 17 Nov 2026 and last seen . It has been picked up by 43 satellite detections, peaking at 19 MW.

Status
Active
First detected
17 Nov 2026, 02:55 UTC
Last detected
17 Nov 2026, 11:08 UTC
Duration
8.2 h
Detections
43
Peak intensity (FRP)
19 MW
Peaked at
17 Nov, 07:48 UTC
Fire footprint
2.8 km × 1.1 km
Detection sources
8 FIRMS, 35 DEA
State
QLD
Confirmation
Satellite only
Data source
FIRMS,DEA

Satellite detections — 43 hot spots

This fire is 43 satellite heat detections merged into one event across 1 day (8 FIRMS, 35 DEA). Each row is one satellite pass over a burning pixel — all of them are plotted on the map above, where the most recent detections are ringed in white. Tap any point on the map for its time and intensity, or switch on the heat map (top-right) to see where activity concentrated.

Time (UTC)IntensitySourceLatitude, Longitude
17 Nov 2026, 11:08 12 MW FIRMS -26.473, 151.028
17 Nov 2026, 10:08 10 MW DEA -26.474, 151.030
17 Nov 2026, 09:58 9 MW DEA -26.474, 151.030
17 Nov 2026, 08:48 11 MW DEA -26.474, 151.030
17 Nov 2026, 08:38 12 MW DEA -26.474, 151.030
17 Nov 2026, 08:28 13 MW DEA -26.474, 151.030
17 Nov 2026, 08:18 13 MW DEA -26.474, 151.030
17 Nov 2026, 07:58 14 MW DEA -26.474, 151.030
17 Nov 2026, 07:48 19 MW DEA -26.474, 151.030
17 Nov 2026, 07:38 16 MW DEA -26.474, 151.010
17 Nov 2026, 07:38 11 MW DEA -26.474, 151.030
17 Nov 2026, 07:28 15 MW DEA -26.474, 151.030
17 Nov 2026, 07:18 14 MW DEA -26.474, 151.010
17 Nov 2026, 07:08 14 MW DEA -26.474, 151.010
17 Nov 2026, 03:53 7 MW FIRMS -26.479, 151.036
17 Nov 2026, 03:53 3 MW FIRMS -26.476, 151.031
17 Nov 2026, 03:53 3 MW FIRMS -26.473, 151.030
17 Nov 2026, 03:52 6 MW DEA -26.480, 151.038
17 Nov 2026, 03:52 7 MW DEA -26.479, 151.035
17 Nov 2026, 03:52 3 MW DEA -26.476, 151.031
17 Nov 2026, 03:52 3 MW DEA -26.473, 151.030
17 Nov 2026, 03:52 6 MW DEA -26.480, 151.038
17 Nov 2026, 03:52 7 MW DEA -26.479, 151.035
17 Nov 2026, 03:52 3 MW DEA -26.476, 151.031
17 Nov 2026, 03:52 3 MW DEA -26.473, 151.030
17 Nov 2026, 03:42 — DEA -26.471, 151.027
17 Nov 2026, 03:42 — DEA -26.474, 151.027
17 Nov 2026, 03:42 — DEA -26.478, 151.031
17 Nov 2026, 03:42 — DEA -26.478, 151.034
17 Nov 2026, 02:55 4 MW DEA -26.477, 151.032
17 Nov 2026, 02:55 4 MW DEA -26.471, 151.031
17 Nov 2026, 02:55 3 MW DEA -26.478, 151.034
17 Nov 2026, 02:55 6 MW DEA -26.473, 151.029
17 Nov 2026, 02:55 4 MW DEA -26.477, 151.032
17 Nov 2026, 02:55 4 MW DEA -26.471, 151.031
17 Nov 2026, 02:55 3 MW DEA -26.478, 151.034
17 Nov 2026, 02:55 6 MW DEA -26.473, 151.029
17 Nov 2026, 02:55 — DEA -26.471, 151.027
17 Nov 2026, 02:55 — DEA -26.474, 151.031
17 Nov 2026, 02:55 3 MW FIRMS -26.478, 151.034
17 Nov 2026, 02:55 4 MW FIRMS -26.476, 151.032
17 Nov 2026, 02:55 6 MW FIRMS -26.473, 151.029
17 Nov 2026, 02:55 4 MW FIRMS -26.471, 151.031

Other fires nearby

This is an unconfirmed satellite detection, not an official warning. Satellites detect heat, which may be a bushfire, a hazard-reduction burn, or industrial activity. Always check the official source and, in an emergency, call 000.

Official information for QLD: Queensland Fire Department.

Frequently asked questions

Is this a real bushfire?

Unless it is marked as matched to an official incident, this is an unconfirmed satellite detection. Satellites detect heat, which can be a bushfire, a hazard-reduction burn or an industrial source. Check the official warnings for confirmation.

What does “peak intensity (FRP)” mean?

FRP (fire radiative power, in megawatts) is how much heat the fire was giving off when a satellite detected it. The peak is the highest reading across all detections — a rough guide to how intense the fire has been.

Why are several nearby detections shown as one fire?

We group satellite detections that are close together in space and time into a single fire event, so a fire front seen across multiple passes appears as one fire rather than scattered dots.

How do I get the official information for this fire?

Follow the official source link on this page (where available) and your state fire agency. In an emergency call 000.