See the live Australia fire map

Fire near Etheridge (QLD)

Satellite detection (unconfirmed)

Intense fire near Etheridge (QLD), first detected 17 Nov 2026 and last seen . It has been picked up by 41 satellite detections, peaking at 78 MW.

Status
Active
First detected
17 Nov 2026, 00:57 UTC
Last detected
17 Nov 2026, 07:27 UTC
Duration
6.5 h
Detections
41
Peak intensity (FRP)
78 MW
Peaked at
17 Nov, 06:17 UTC
Fire footprint
5.1 km × 2.2 km
Detection sources
37 DEA, 4 FIRMS
State
QLD
Confirmation
Satellite only
Data source
DEA,FIRMS

Satellite detections — 41 hot spots

This fire is 41 satellite heat detections merged into one event across 1 day (37 DEA, 4 FIRMS). Each row is one satellite pass over a burning pixel — all of them are plotted on the map above, where the most recent detections are ringed in white. Tap any point on the map for its time and intensity, or switch on the heat map (top-right) to see where activity concentrated.

Time (UTC)IntensitySourceLatitude, Longitude
17 Nov 2026, 07:27 16 MW DEA -18.390, 143.231
17 Nov 2026, 07:17 17 MW DEA -18.390, 143.231
17 Nov 2026, 07:07 18 MW DEA -18.390, 143.231
17 Nov 2026, 07:07 52 MW DEA -18.409, 143.251
17 Nov 2026, 06:57 33 MW DEA -18.390, 143.251
17 Nov 2026, 06:57 16 MW DEA -18.409, 143.232
17 Nov 2026, 06:47 27 MW DEA -18.390, 143.231
17 Nov 2026, 06:47 38 MW DEA -18.390, 143.251
17 Nov 2026, 06:47 20 MW DEA -18.409, 143.232
17 Nov 2026, 06:47 61 MW DEA -18.409, 143.251
17 Nov 2026, 06:27 19 MW DEA -18.390, 143.231
17 Nov 2026, 06:27 23 MW DEA -18.390, 143.251
17 Nov 2026, 06:17 73 MW DEA -18.390, 143.231
17 Nov 2026, 06:17 78 MW DEA -18.390, 143.251
17 Nov 2026, 06:17 23 MW DEA -18.409, 143.232
17 Nov 2026, 06:07 47 MW DEA -18.390, 143.251
17 Nov 2026, 06:07 20 MW DEA -18.409, 143.232
17 Nov 2026, 06:07 76 MW FIRMS -18.395, 143.245
17 Nov 2026, 05:57 30 MW DEA -18.390, 143.251
17 Nov 2026, 05:56 8 MW DEA -18.391, 143.261
17 Nov 2026, 05:47 23 MW DEA -18.390, 143.231
17 Nov 2026, 05:47 33 MW DEA -18.390, 143.251
17 Nov 2026, 05:47 22 MW DEA -18.409, 143.232
17 Nov 2026, 05:37 39 MW DEA -18.390, 143.231
17 Nov 2026, 05:37 50 MW DEA -18.390, 143.251
17 Nov 2026, 05:37 43 MW DEA -18.409, 143.232
17 Nov 2026, 05:37 61 MW DEA -18.409, 143.251
17 Nov 2026, 05:27 29 MW DEA -18.390, 143.231
17 Nov 2026, 05:27 34 MW DEA -18.409, 143.232
17 Nov 2026, 05:17 20 MW DEA -18.390, 143.213
17 Nov 2026, 05:17 68 MW DEA -18.390, 143.231
17 Nov 2026, 04:38 4 MW FIRMS -18.397, 143.241
17 Nov 2026, 04:38 4 MW FIRMS -18.393, 143.234
17 Nov 2026, 04:38 4 MW FIRMS -18.392, 143.237
17 Nov 2026, 04:37 3 MW DEA -18.397, 143.241
17 Nov 2026, 04:37 4 MW DEA -18.393, 143.237
17 Nov 2026, 04:37 4 MW DEA -18.393, 143.234
17 Nov 2026, 04:37 3 MW DEA -18.397, 143.241
17 Nov 2026, 04:37 4 MW DEA -18.393, 143.237
17 Nov 2026, 04:37 4 MW DEA -18.393, 143.234
17 Nov 2026, 00:57 38 MW DEA -18.390, 143.213

Other fires nearby

This is an unconfirmed satellite detection, not an official warning. Satellites detect heat, which may be a bushfire, a hazard-reduction burn, or industrial activity. Always check the official source and, in an emergency, call 000.

Official information for QLD: Queensland Fire Department.

Frequently asked questions

Is this a real bushfire?

Unless it is marked as matched to an official incident, this is an unconfirmed satellite detection. Satellites detect heat, which can be a bushfire, a hazard-reduction burn or an industrial source. Check the official warnings for confirmation.

What does “peak intensity (FRP)” mean?

FRP (fire radiative power, in megawatts) is how much heat the fire was giving off when a satellite detected it. The peak is the highest reading across all detections — a rough guide to how intense the fire has been.

Why are several nearby detections shown as one fire?

We group satellite detections that are close together in space and time into a single fire event, so a fire front seen across multiple passes appears as one fire rather than scattered dots.

How do I get the official information for this fire?

Follow the official source link on this page (where available) and your state fire agency. In an emergency call 000.