See the live Australia fire map

Fire near Whitsunday (QLD)

Satellite detection (unconfirmed)

Intense fire near Whitsunday (QLD), first detected 16 Nov 2026 and last seen . It has been picked up by 42 satellite detections, peaking at 51 MW.

Status
Active
First detected
16 Nov 2026, 03:04 UTC
Last detected
17 Nov 2026, 06:07 UTC
Duration
27.1 h
Detections
42
Peak intensity (FRP)
51 MW
Peaked at
16 Nov, 04:12 UTC
Fire footprint
2.6 km × 2.4 km
Detection sources
36 DEA, 6 FIRMS
State
QLD
Confirmation
Satellite only
Data source
DEA,FIRMS

How this fire has evolved

Satellite detections per day and the strongest reading each day — a quick sense of when this fire flared up and when it eased. Times are UTC.

DayDetectionsPeak intensitySources
16 Nov 2026 28 51 MW DEA
17 Nov 2026 14 28 MW FIRMS, DEA

Satellite detections — 42 hot spots

This fire is 42 satellite heat detections merged into one event across 2 days (36 DEA, 6 FIRMS). Each row is one satellite pass over a burning pixel — all of them are plotted on the map above, where the most recent detections are ringed in white. Tap any point on the map for its time and intensity, or switch on the heat map (top-right) to see where activity concentrated.

Time (UTC)IntensitySourceLatitude, Longitude
17 Nov 2026, 06:07 22 MW DEA -20.148, 147.970
17 Nov 2026, 06:07 17 MW DEA -20.139, 147.968
17 Nov 2026, 06:07 22 MW FIRMS -20.148, 147.970
17 Nov 2026, 06:07 17 MW FIRMS -20.139, 147.968
17 Nov 2026, 05:56 20 MW DEA -20.141, 147.971
17 Nov 2026, 05:56 28 MW DEA -20.151, 147.971
17 Nov 2026, 04:38 7 MW FIRMS -20.143, 147.968
17 Nov 2026, 04:38 9 MW FIRMS -20.142, 147.974
17 Nov 2026, 04:37 9 MW DEA -20.142, 147.974
17 Nov 2026, 04:37 7 MW DEA -20.144, 147.968
17 Nov 2026, 04:37 9 MW DEA -20.142, 147.974
17 Nov 2026, 04:37 7 MW DEA -20.144, 147.968
17 Nov 2026, 02:57 18 MW FIRMS -20.145, 147.970
17 Nov 2026, 02:57 13 MW FIRMS -20.145, 147.975
16 Nov 2026, 15:23 2 MW DEA -20.139, 147.964
16 Nov 2026, 15:23 2 MW DEA -20.139, 147.964
16 Nov 2026, 04:12 51 MW DEA -20.137, 147.967
16 Nov 2026, 04:12 25 MW DEA -20.135, 147.970
16 Nov 2026, 04:12 25 MW DEA -20.136, 147.964
16 Nov 2026, 04:12 51 MW DEA -20.137, 147.967
16 Nov 2026, 04:12 25 MW DEA -20.135, 147.970
16 Nov 2026, 04:12 25 MW DEA -20.136, 147.964
16 Nov 2026, 04:12 51 MW DEA -20.137, 147.967
16 Nov 2026, 04:12 25 MW DEA -20.135, 147.970
16 Nov 2026, 04:12 25 MW DEA -20.136, 147.964
16 Nov 2026, 04:01 — DEA -20.133, 147.959
16 Nov 2026, 04:01 — DEA -20.133, 147.963
16 Nov 2026, 04:01 — DEA -20.133, 147.967
16 Nov 2026, 04:01 — DEA -20.137, 147.963
16 Nov 2026, 04:01 — DEA -20.137, 147.967
16 Nov 2026, 04:01 — DEA -20.137, 147.971
16 Nov 2026, 03:15 19 MW DEA -20.134, 147.984
16 Nov 2026, 03:15 17 MW DEA -20.137, 147.982
16 Nov 2026, 03:15 13 MW DEA -20.139, 147.980
16 Nov 2026, 03:15 11 MW DEA -20.134, 147.980
16 Nov 2026, 03:15 19 MW DEA -20.134, 147.984
16 Nov 2026, 03:15 17 MW DEA -20.137, 147.982
16 Nov 2026, 03:15 13 MW DEA -20.139, 147.980
16 Nov 2026, 03:15 11 MW DEA -20.134, 147.980
16 Nov 2026, 03:04 — DEA -20.129, 147.978
16 Nov 2026, 03:04 — DEA -20.133, 147.978
16 Nov 2026, 03:04 — DEA -20.137, 147.978

Other fires nearby

This is an unconfirmed satellite detection, not an official warning. Satellites detect heat, which may be a bushfire, a hazard-reduction burn, or industrial activity. Always check the official source and, in an emergency, call 000.

Official information for QLD: Queensland Fire Department.

Frequently asked questions

Is this a real bushfire?

Unless it is marked as matched to an official incident, this is an unconfirmed satellite detection. Satellites detect heat, which can be a bushfire, a hazard-reduction burn or an industrial source. Check the official warnings for confirmation.

What does “peak intensity (FRP)” mean?

FRP (fire radiative power, in megawatts) is how much heat the fire was giving off when a satellite detected it. The peak is the highest reading across all detections — a rough guide to how intense the fire has been.

Why are several nearby detections shown as one fire?

We group satellite detections that are close together in space and time into a single fire event, so a fire front seen across multiple passes appears as one fire rather than scattered dots.

How do I get the official information for this fire?

Follow the official source link on this page (where available) and your state fire agency. In an emergency call 000.