See the live Australia fire map

Fire near Maranoa (QLD)

Satellite detection (unconfirmed)

Lower intensity fire near Maranoa (QLD), first detected 16 Nov 2026 and last seen . It has been picked up by 36 satellite detections, peaking at 30 MW.

Status
Recent
First detected
16 Nov 2026, 03:04 UTC
Last detected
16 Nov 2026, 04:11 UTC
Duration
1.1 h
Detections
36
Peak intensity (FRP)
30 MW
Peaked at
16 Nov, 03:14 UTC
Fire footprint
2.2 km × 0.9 km
Detection sources
36 DEA
State
QLD
Confirmation
Satellite only
Data source
DEA

Satellite detections — 36 hot spots

This fire is 36 satellite heat detections merged into one event across 1 day (36 DEA). Each row is one satellite pass over a burning pixel — all of them are plotted on the map above, where the most recent detections are ringed in white. Tap any point on the map for its time and intensity, or switch on the heat map (top-right) to see where activity concentrated.

Time (UTC)IntensitySourceLatitude, Longitude
16 Nov 2026, 04:11 5 MW DEA -26.192, 148.478
16 Nov 2026, 04:11 6 MW DEA -26.194, 148.469
16 Nov 2026, 04:11 13 MW DEA -26.196, 148.459
16 Nov 2026, 04:11 7 MW DEA -26.196, 148.467
16 Nov 2026, 04:11 6 MW DEA -26.190, 148.480
16 Nov 2026, 04:11 13 MW DEA -26.194, 148.461
16 Nov 2026, 04:11 4 MW DEA -26.190, 148.460
16 Nov 2026, 04:11 5 MW DEA -26.192, 148.478
16 Nov 2026, 04:11 6 MW DEA -26.194, 148.469
16 Nov 2026, 04:11 13 MW DEA -26.196, 148.459
16 Nov 2026, 04:11 7 MW DEA -26.196, 148.467
16 Nov 2026, 04:11 6 MW DEA -26.190, 148.480
16 Nov 2026, 04:11 13 MW DEA -26.194, 148.461
16 Nov 2026, 04:11 4 MW DEA -26.190, 148.460
16 Nov 2026, 04:11 5 MW DEA -26.192, 148.478
16 Nov 2026, 04:11 6 MW DEA -26.194, 148.469
16 Nov 2026, 04:11 13 MW DEA -26.196, 148.459
16 Nov 2026, 04:11 7 MW DEA -26.196, 148.467
16 Nov 2026, 04:11 6 MW DEA -26.190, 148.480
16 Nov 2026, 04:11 13 MW DEA -26.194, 148.461
16 Nov 2026, 04:11 4 MW DEA -26.190, 148.460
16 Nov 2026, 04:01 — DEA -26.189, 148.458
16 Nov 2026, 04:01 — DEA -26.189, 148.477
16 Nov 2026, 04:01 — DEA -26.193, 148.458
16 Nov 2026, 04:01 — DEA -26.193, 148.462
16 Nov 2026, 04:01 — DEA -26.193, 148.466
16 Nov 2026, 04:01 — DEA -26.197, 148.462
16 Nov 2026, 04:01 — DEA -26.197, 148.466
16 Nov 2026, 03:14 30 MW DEA -26.195, 148.464
16 Nov 2026, 03:14 15 MW DEA -26.197, 148.467
16 Nov 2026, 03:14 15 MW DEA -26.193, 148.460
16 Nov 2026, 03:14 30 MW DEA -26.195, 148.464
16 Nov 2026, 03:14 15 MW DEA -26.197, 148.467
16 Nov 2026, 03:14 15 MW DEA -26.193, 148.460
16 Nov 2026, 03:04 — DEA -26.193, 148.458
16 Nov 2026, 03:04 — DEA -26.197, 148.462

Other fires nearby

This is an unconfirmed satellite detection, not an official warning. Satellites detect heat, which may be a bushfire, a hazard-reduction burn, or industrial activity. Always check the official source and, in an emergency, call 000.

Official information for QLD: Queensland Fire Department.

Frequently asked questions

Is this a real bushfire?

Unless it is marked as matched to an official incident, this is an unconfirmed satellite detection. Satellites detect heat, which can be a bushfire, a hazard-reduction burn or an industrial source. Check the official warnings for confirmation.

What does “peak intensity (FRP)” mean?

FRP (fire radiative power, in megawatts) is how much heat the fire was giving off when a satellite detected it. The peak is the highest reading across all detections — a rough guide to how intense the fire has been.

Why are several nearby detections shown as one fire?

We group satellite detections that are close together in space and time into a single fire event, so a fire front seen across multiple passes appears as one fire rather than scattered dots.

How do I get the official information for this fire?

Follow the official source link on this page (where available) and your state fire agency. In an emergency call 000.