See the live Australia fire map

Fire near Tablelands (QLD)

Satellite detection (unconfirmed)

Very intense fire near Tablelands (QLD), first detected 15 Nov 2026 and last seen . It has been picked up by 53 satellite detections, peaking at 239 MW.

Status
Active
First detected
15 Nov 2026, 03:47 UTC
Last detected
17 Nov 2026, 02:27 UTC
Duration
46.7 h
Detections
53
Peak intensity (FRP)
239 MW
Peaked at
17 Nov, 01:57 UTC
Fire footprint
4.7 km × 4.3 km
Detection sources
53 DEA
State
QLD
Confirmation
Satellite only
Data source
DEA

How this fire has evolved

Satellite detections per day and the strongest reading each day — a quick sense of when this fire flared up and when it eased. Times are UTC.

DayDetectionsPeak intensitySources
15 Nov 2026 27 166 MW DEA
16 Nov 2026 19 47 MW DEA
17 Nov 2026 7 239 MW DEA

Satellite detections — 53 hot spots

This fire is 53 satellite heat detections merged into one event across 3 days (53 DEA). Each row is one satellite pass over a burning pixel — all of them are plotted on the map above, where the most recent detections are ringed in white. Tap any point on the map for its time and intensity, or switch on the heat map (top-right) to see where activity concentrated.

Time (UTC)IntensitySourceLatitude, Longitude
17 Nov 2026, 02:27 44 MW DEA -17.906, 144.961
17 Nov 2026, 02:27 43 MW DEA -17.906, 144.981
17 Nov 2026, 02:17 69 MW DEA -17.906, 144.961
17 Nov 2026, 01:57 239 MW DEA -17.906, 144.961
17 Nov 2026, 01:47 239 MW DEA -17.906, 144.961
17 Nov 2026, 01:47 213 MW DEA -17.906, 144.981
17 Nov 2026, 00:07 22 MW DEA -17.926, 144.981
16 Nov 2026, 23:37 20 MW DEA -17.945, 144.962
16 Nov 2026, 23:37 16 MW DEA -17.926, 144.961
16 Nov 2026, 04:13 36 MW DEA -17.933, 144.966
16 Nov 2026, 04:13 37 MW DEA -17.934, 144.969
16 Nov 2026, 04:13 36 MW DEA -17.933, 144.966
16 Nov 2026, 04:13 37 MW DEA -17.934, 144.969
16 Nov 2026, 04:13 46 MW DEA -17.923, 144.981
16 Nov 2026, 04:13 16 MW DEA -17.924, 144.973
16 Nov 2026, 04:13 10 MW DEA -17.928, 144.984
16 Nov 2026, 04:13 10 MW DEA -17.929, 144.980
16 Nov 2026, 04:13 47 MW DEA -17.925, 144.980
16 Nov 2026, 04:13 16 MW DEA -17.926, 144.975
16 Nov 2026, 04:13 46 MW DEA -17.923, 144.981
16 Nov 2026, 04:13 16 MW DEA -17.924, 144.973
16 Nov 2026, 04:13 10 MW DEA -17.928, 144.984
16 Nov 2026, 04:13 10 MW DEA -17.929, 144.980
16 Nov 2026, 04:13 47 MW DEA -17.925, 144.980
16 Nov 2026, 04:13 16 MW DEA -17.926, 144.975
16 Nov 2026, 04:01 — DEA -17.924, 144.974
15 Nov 2026, 14:45 2 MW DEA -17.923, 144.971
15 Nov 2026, 14:45 2 MW DEA -17.923, 144.971
15 Nov 2026, 06:57 26 MW DEA -17.926, 144.961
15 Nov 2026, 06:47 33 MW DEA -17.926, 144.961
15 Nov 2026, 06:37 55 MW DEA -17.926, 144.961
15 Nov 2026, 06:37 17 MW DEA -17.945, 144.962
15 Nov 2026, 06:29 27 MW DEA -17.926, 144.963
15 Nov 2026, 06:29 17 MW DEA -17.922, 144.984
15 Nov 2026, 06:29 166 MW DEA -17.924, 144.974
15 Nov 2026, 06:29 8 MW DEA -17.918, 144.951
15 Nov 2026, 06:29 11 MW DEA -17.920, 144.940
15 Nov 2026, 06:29 23 MW DEA -17.935, 144.965
15 Nov 2026, 06:29 57 MW DEA -17.933, 144.975
15 Nov 2026, 06:27 145 MW DEA -17.926, 144.961
15 Nov 2026, 06:27 69 MW DEA -17.945, 144.962
15 Nov 2026, 06:18 29 MW DEA -17.931, 144.961
15 Nov 2026, 06:18 55 MW DEA -17.931, 144.971
15 Nov 2026, 06:18 17 MW DEA -17.921, 144.981
15 Nov 2026, 06:18 27 MW DEA -17.941, 144.961
15 Nov 2026, 06:18 13 MW DEA -17.921, 144.941
15 Nov 2026, 06:18 10 MW DEA -17.921, 144.951
15 Nov 2026, 06:17 122 MW DEA -17.926, 144.961
15 Nov 2026, 06:17 74 MW DEA -17.926, 144.981
15 Nov 2026, 06:17 106 MW DEA -17.945, 144.962
15 Nov 2026, 06:17 64 MW DEA -17.945, 144.981
15 Nov 2026, 03:57 — DEA -17.926, 144.961
15 Nov 2026, 03:47 — DEA -17.926, 144.961

Other fires nearby

This is an unconfirmed satellite detection, not an official warning. Satellites detect heat, which may be a bushfire, a hazard-reduction burn, or industrial activity. Always check the official source and, in an emergency, call 000.

Official information for QLD: Queensland Fire Department.

Frequently asked questions

Is this a real bushfire?

Unless it is marked as matched to an official incident, this is an unconfirmed satellite detection. Satellites detect heat, which can be a bushfire, a hazard-reduction burn or an industrial source. Check the official warnings for confirmation.

What does “peak intensity (FRP)” mean?

FRP (fire radiative power, in megawatts) is how much heat the fire was giving off when a satellite detected it. The peak is the highest reading across all detections — a rough guide to how intense the fire has been.

Why are several nearby detections shown as one fire?

We group satellite detections that are close together in space and time into a single fire event, so a fire front seen across multiple passes appears as one fire rather than scattered dots.

How do I get the official information for this fire?

Follow the official source link on this page (where available) and your state fire agency. In an emergency call 000.