See the live Australia fire map

Fire near Burke (QLD)

Satellite detection (unconfirmed)

Intense fire near Burke (QLD), first detected 15 Nov 2026 and last seen . It has been picked up by 54 satellite detections, peaking at 90 MW.

Status
Recent
First detected
15 Nov 2026, 07:57 UTC
Last detected
15 Nov 2026, 16:25 UTC
Duration
8.5 h
Detections
54
Peak intensity (FRP)
90 MW
Peaked at
15 Nov, 15:42 UTC
Fire footprint
3.4 km × 2.1 km
Detection sources
54 DEA
State
QLD
Confirmation
Satellite only
Data source
DEA

Satellite detections — 54 hot spots

This fire is 54 satellite heat detections merged into one event across 1 day (54 DEA). Each row is one satellite pass over a burning pixel — all of them are plotted on the map above, where the most recent detections are ringed in white. Tap any point on the map for its time and intensity, or switch on the heat map (top-right) to see where activity concentrated.

Time (UTC)IntensitySourceLatitude, Longitude
15 Nov 2026, 16:25 1 MW DEA -18.093, 139.716
15 Nov 2026, 16:25 1 MW DEA -18.098, 139.716
15 Nov 2026, 16:25 1 MW DEA -18.098, 139.721
15 Nov 2026, 16:25 2 MW DEA -18.105, 139.732
15 Nov 2026, 16:25 1 MW DEA -18.093, 139.716
15 Nov 2026, 16:25 1 MW DEA -18.098, 139.716
15 Nov 2026, 16:25 1 MW DEA -18.098, 139.721
15 Nov 2026, 16:25 2 MW DEA -18.105, 139.732
15 Nov 2026, 15:42 35 MW DEA -18.098, 139.725
15 Nov 2026, 15:42 28 MW DEA -18.099, 139.736
15 Nov 2026, 15:42 90 MW DEA -18.105, 139.724
15 Nov 2026, 15:42 10 MW DEA -18.098, 139.739
15 Nov 2026, 15:42 3 MW DEA -18.099, 139.744
15 Nov 2026, 15:42 18 MW DEA -18.100, 139.728
15 Nov 2026, 15:42 10 MW DEA -18.101, 139.733
15 Nov 2026, 15:42 10 MW DEA -18.102, 139.738
15 Nov 2026, 15:42 18 MW DEA -18.099, 139.722
15 Nov 2026, 15:42 3 MW DEA -18.104, 139.748
15 Nov 2026, 15:42 23 MW DEA -18.103, 139.722
15 Nov 2026, 15:42 23 MW DEA -18.104, 139.727
15 Nov 2026, 15:42 3 MW DEA -18.102, 139.716
15 Nov 2026, 15:42 3 MW DEA -18.105, 139.732
15 Nov 2026, 15:42 23 MW DEA -18.107, 139.721
15 Nov 2026, 15:42 23 MW DEA -18.108, 139.726
15 Nov 2026, 15:42 2 MW DEA -18.112, 139.725
15 Nov 2026, 15:42 35 MW DEA -18.098, 139.725
15 Nov 2026, 15:42 28 MW DEA -18.099, 139.736
15 Nov 2026, 15:42 90 MW DEA -18.105, 139.724
15 Nov 2026, 15:42 10 MW DEA -18.098, 139.739
15 Nov 2026, 15:42 3 MW DEA -18.099, 139.744
15 Nov 2026, 15:42 18 MW DEA -18.100, 139.728
15 Nov 2026, 15:42 10 MW DEA -18.101, 139.733
15 Nov 2026, 15:42 10 MW DEA -18.102, 139.738
15 Nov 2026, 15:42 18 MW DEA -18.099, 139.722
15 Nov 2026, 15:42 3 MW DEA -18.104, 139.748
15 Nov 2026, 15:42 23 MW DEA -18.103, 139.722
15 Nov 2026, 15:42 23 MW DEA -18.104, 139.727
15 Nov 2026, 15:42 3 MW DEA -18.102, 139.716
15 Nov 2026, 15:42 3 MW DEA -18.105, 139.732
15 Nov 2026, 15:42 23 MW DEA -18.107, 139.721
15 Nov 2026, 15:42 23 MW DEA -18.108, 139.726
15 Nov 2026, 15:42 2 MW DEA -18.112, 139.725
15 Nov 2026, 15:35 — DEA -18.097, 139.717
15 Nov 2026, 15:35 — DEA -18.097, 139.736
15 Nov 2026, 15:35 — DEA -18.101, 139.717
15 Nov 2026, 15:35 — DEA -18.101, 139.721
15 Nov 2026, 15:35 — DEA -18.101, 139.724
15 Nov 2026, 15:35 — DEA -18.101, 139.728
15 Nov 2026, 15:35 — DEA -18.101, 139.736
15 Nov 2026, 15:35 — DEA -18.101, 139.743
15 Nov 2026, 15:35 — DEA -18.101, 139.747
15 Nov 2026, 15:35 — DEA -18.104, 139.717
15 Nov 2026, 15:35 — DEA -18.104, 139.724
15 Nov 2026, 07:57 12 MW DEA -18.111, 139.718

Other fires nearby

This is an unconfirmed satellite detection, not an official warning. Satellites detect heat, which may be a bushfire, a hazard-reduction burn, or industrial activity. Always check the official source and, in an emergency, call 000.

Official information for QLD: Queensland Fire Department.

Frequently asked questions

Is this a real bushfire?

Unless it is marked as matched to an official incident, this is an unconfirmed satellite detection. Satellites detect heat, which can be a bushfire, a hazard-reduction burn or an industrial source. Check the official warnings for confirmation.

What does “peak intensity (FRP)” mean?

FRP (fire radiative power, in megawatts) is how much heat the fire was giving off when a satellite detected it. The peak is the highest reading across all detections — a rough guide to how intense the fire has been.

Why are several nearby detections shown as one fire?

We group satellite detections that are close together in space and time into a single fire event, so a fire front seen across multiple passes appears as one fire rather than scattered dots.

How do I get the official information for this fire?

Follow the official source link on this page (where available) and your state fire agency. In an emergency call 000.