See the live Australia fire map

Fire near Lockyer Valley (QLD)

Confirmed by official incident

Official warning: Advice (FIRE VEGETATION) — QFD · official source

Intense fire near Lockyer Valley (QLD), first detected 1 Oct 2026 and last seen . It has been picked up by 52 satellite detections, peaking at 67 MW.

Status
Active
First detected
1 Oct 2026, 02:28 UTC
Last detected
2 Oct 2026, 02:38 UTC
Duration
24.2 h
Detections
52
Peak intensity (FRP)
67 MW
Peaked at
1 Oct, 03:32 UTC
Fire footprint
9.3 km × 8.4 km
Burnt area (perimeter)
27 ha
Detection sources
43 DEA, 9 FIRMS
State
QLD
Confirmation
Official
Data source
DEA,FIRMS

Burnt area & fire boundaries

Official mapped boundaries overlapping this fire — the ground it has burned. These are drawn on the map above (the shaded red areas). Boundaries are captured periodically, so the true edge may have moved since.

  • Fire boundary 27 ha · 2.7 km perimeter · Qld Fire and Emergency Services · mapped

Official incident details

Warning level
Advice
Type
Fire
Status
FIRE VEGETATION
Agency
QFD
Updated
Official advice (verbatim):
Stay Informed

Official source ↗

Crew, appliance and aircraft numbers aren't published in Australia's open incident feeds, so we can't list firefighters here — follow the official source above for operational detail.

Satellite detections — 52 hot spots

This fire is 52 satellite heat detections merged into one event across 1 day (43 DEA, 9 FIRMS). Each row is one satellite pass over a burning pixel — all of them are plotted on the map above, where the most recent detections are ringed in white. Tap any point on the map for its time and intensity, or switch on the heat map (top-right) to see where activity concentrated.

Time (UTC)IntensitySourceLatitude, Longitude
1 Oct 2026, 04:18 25 MW DEA -27.756, 152.213
1 Oct 2026, 04:17 9 MW FIRMS -27.755, 152.208
1 Oct 2026, 04:17 9 MW FIRMS -27.750, 152.205
1 Oct 2026, 04:17 9 MW FIRMS -27.749, 152.210
1 Oct 2026, 04:16 27 MW DEA -27.753, 152.209
1 Oct 2026, 04:16 9 MW DEA -27.756, 152.207
1 Oct 2026, 04:16 9 MW DEA -27.751, 152.205
1 Oct 2026, 04:16 9 MW DEA -27.750, 152.210
1 Oct 2026, 04:16 27 MW DEA -27.753, 152.209
1 Oct 2026, 04:16 9 MW DEA -27.756, 152.207
1 Oct 2026, 04:16 9 MW DEA -27.750, 152.210
1 Oct 2026, 04:08 42 MW DEA -27.755, 152.191
1 Oct 2026, 04:08 44 MW DEA -27.756, 152.213
1 Oct 2026, 04:08 — DEA -27.757, 152.204
1 Oct 2026, 04:08 — DEA -27.746, 152.208
1 Oct 2026, 04:08 — DEA -27.749, 152.201
1 Oct 2026, 04:08 — DEA -27.749, 152.204
1 Oct 2026, 04:08 — DEA -27.749, 152.208
1 Oct 2026, 04:08 — DEA -27.753, 152.204
1 Oct 2026, 03:58 41 MW DEA -27.755, 152.191
1 Oct 2026, 03:32 11 MW DEA -27.751, 152.212
1 Oct 2026, 03:32 67 MW DEA -27.752, 152.204
1 Oct 2026, 03:32 6 MW DEA -27.753, 152.210
1 Oct 2026, 03:32 6 MW DEA -27.750, 152.209
1 Oct 2026, 03:32 11 MW DEA -27.751, 152.212
1 Oct 2026, 03:32 67 MW DEA -27.752, 152.204
1 Oct 2026, 03:32 6 MW DEA -27.753, 152.210
1 Oct 2026, 03:32 6 MW DEA -27.750, 152.209
1 Oct 2026, 03:32 6 MW FIRMS -27.753, 152.210
1 Oct 2026, 03:32 6 MW FIRMS -27.749, 152.210
1 Oct 2026, 03:22 — DEA -27.749, 152.204
1 Oct 2026, 03:22 — DEA -27.749, 152.208
1 Oct 2026, 03:15 33 MW FIRMS -27.750, 152.207
1 Oct 2026, 03:15 14 MW FIRMS -27.749, 152.212
1 Oct 2026, 03:12 33 MW DEA -27.753, 152.203
1 Oct 2026, 03:12 14 MW DEA -27.749, 152.211
1 Oct 2026, 03:12 33 MW DEA -27.750, 152.206
1 Oct 2026, 03:04 — DEA -27.746, 152.204
1 Oct 2026, 03:04 — DEA -27.746, 152.208
1 Oct 2026, 03:04 — DEA -27.749, 152.201
1 Oct 2026, 03:04 — DEA -27.749, 152.204
1 Oct 2026, 03:04 — DEA -27.749, 152.208
1 Oct 2026, 02:36 13 MW FIRMS -27.751, 152.207
1 Oct 2026, 02:36 18 MW FIRMS -27.751, 152.213
1 Oct 2026, 02:35 18 MW DEA -27.752, 152.213
1 Oct 2026, 02:35 13 MW DEA -27.752, 152.208
1 Oct 2026, 02:35 18 MW DEA -27.755, 152.217
1 Oct 2026, 02:28 — DEA -27.749, 152.204
1 Oct 2026, 02:28 — DEA -27.749, 152.208
1 Oct 2026, 02:28 — DEA -27.749, 152.212
1 Oct 2026, 02:28 — DEA -27.753, 152.208
1 Oct 2026, 02:28 — DEA -27.753, 152.212

Other fires nearby

This satellite fire has been matched to an official incident (see the warning above). The official advice is the authority — always follow your fire agency, and in an emergency call 000.

Official information for QLD: Queensland Fire Department.

Frequently asked questions

Is this a real bushfire?

Unless it is marked as matched to an official incident, this is an unconfirmed satellite detection. Satellites detect heat, which can be a bushfire, a hazard-reduction burn or an industrial source. Check the official warnings for confirmation.

What does “peak intensity (FRP)” mean?

FRP (fire radiative power, in megawatts) is how much heat the fire was giving off when a satellite detected it. The peak is the highest reading across all detections — a rough guide to how intense the fire has been.

Why are several nearby detections shown as one fire?

We group satellite detections that are close together in space and time into a single fire event, so a fire front seen across multiple passes appears as one fire rather than scattered dots.

How do I get the official information for this fire?

Follow the official source link on this page (where available) and your state fire agency. In an emergency call 000.