See the live Australia fire map

Fire near Blackall Tambo (QLD)

Satellite detection (unconfirmed)

Lower intensity fire near Blackall Tambo (QLD), first detected 30 Sep 2026 and last seen . It has been picked up by 56 satellite detections, peaking at 28 MW.

Status
Active
First detected
30 Sep 2026, 05:12 UTC
Last detected
1 Oct 2026, 04:53 UTC
Duration
23.7 h
Detections
56
Peak intensity (FRP)
28 MW
Peaked at
1 Oct, 04:17 UTC
Fire footprint
2.1 km × 1.5 km
Detection sources
50 DEA, 6 FIRMS
State
QLD
Confirmation
Satellite only
Data source
DEA,FIRMS

How this fire has evolved

Satellite detections per day and the strongest reading each day — a quick sense of when this fire flared up and when it eased. Times are UTC.

DayDetectionsPeak intensitySources
30 Sep 2026 23 25 MW DEA
1 Oct 2026 33 28 MW DEA, FIRMS

Satellite detections — 56 hot spots

This fire is 56 satellite heat detections merged into one event across 2 days (50 DEA, 6 FIRMS). Each row is one satellite pass over a burning pixel — all of them are plotted on the map above, where the most recent detections are ringed in white. Tap any point on the map for its time and intensity, or switch on the heat map (top-right) to see where activity concentrated.

Time (UTC)IntensitySourceLatitude, Longitude
1 Oct 2026, 04:53 11 MW DEA -24.508, 145.562
1 Oct 2026, 04:53 5 MW DEA -24.509, 145.558
1 Oct 2026, 04:53 5 MW DEA -24.509, 145.558
1 Oct 2026, 04:53 5 MW FIRMS -24.508, 145.560
1 Oct 2026, 04:53 11 MW FIRMS -24.507, 145.564
1 Oct 2026, 04:45 — DEA -24.506, 145.556
1 Oct 2026, 04:45 — DEA -24.506, 145.559
1 Oct 2026, 04:18 27 MW DEA -24.505, 145.563
1 Oct 2026, 04:18 27 MW DEA -24.508, 145.561
1 Oct 2026, 04:18 27 MW DEA -24.505, 145.563
1 Oct 2026, 04:18 27 MW DEA -24.508, 145.561
1 Oct 2026, 04:17 28 MW FIRMS -24.508, 145.561
1 Oct 2026, 04:08 — DEA -24.506, 145.556
1 Oct 2026, 04:08 — DEA -24.506, 145.559
1 Oct 2026, 03:34 25 MW FIRMS -24.508, 145.565
1 Oct 2026, 03:32 25 MW DEA -24.505, 145.566
1 Oct 2026, 03:32 25 MW DEA -24.508, 145.564
1 Oct 2026, 03:32 25 MW DEA -24.505, 145.566
1 Oct 2026, 03:32 25 MW DEA -24.508, 145.564
1 Oct 2026, 03:22 — DEA -24.506, 145.556
1 Oct 2026, 03:22 — DEA -24.506, 145.559
1 Oct 2026, 03:22 — DEA -24.506, 145.563
1 Oct 2026, 03:15 15 MW FIRMS -24.508, 145.560
1 Oct 2026, 03:15 17 MW FIRMS -24.507, 145.567
1 Oct 2026, 03:14 15 MW DEA -24.508, 145.559
1 Oct 2026, 03:14 17 MW DEA -24.508, 145.566
1 Oct 2026, 03:04 — DEA -24.502, 145.556
1 Oct 2026, 03:04 — DEA -24.506, 145.552
1 Oct 2026, 03:04 — DEA -24.506, 145.556
1 Oct 2026, 03:04 — DEA -24.506, 145.559
1 Oct 2026, 03:04 — DEA -24.506, 145.563
1 Oct 2026, 03:04 — DEA -24.509, 145.556
1 Oct 2026, 02:27 24 MW DEA -24.497, 145.550
30 Sep 2026, 17:39 — DEA -24.511, 145.571
30 Sep 2026, 16:26 1 MW DEA -24.501, 145.568
30 Sep 2026, 16:26 1 MW DEA -24.507, 145.567
30 Sep 2026, 16:26 1 MW DEA -24.506, 145.567
30 Sep 2026, 16:26 1 MW DEA -24.501, 145.568
30 Sep 2026, 16:26 1 MW DEA -24.507, 145.567
30 Sep 2026, 16:26 1 MW DEA -24.506, 145.567
30 Sep 2026, 15:49 1 MW DEA -24.501, 145.564
30 Sep 2026, 15:49 1 MW DEA -24.506, 145.564
30 Sep 2026, 15:49 2 MW DEA -24.506, 145.568
30 Sep 2026, 15:49 1 MW DEA -24.501, 145.564
30 Sep 2026, 15:49 1 MW DEA -24.506, 145.564
30 Sep 2026, 15:49 2 MW DEA -24.506, 145.568
30 Sep 2026, 15:05 2 MW DEA -24.504, 145.564
30 Sep 2026, 15:05 2 MW DEA -24.505, 145.568
30 Sep 2026, 15:01 — DEA -24.502, 145.559
30 Sep 2026, 15:01 — DEA -24.502, 145.563
30 Sep 2026, 15:01 — DEA -24.502, 145.567
30 Sep 2026, 14:45 2 MW DEA -24.505, 145.565
30 Sep 2026, 14:45 1 MW DEA -24.506, 145.571
30 Sep 2026, 14:45 2 MW DEA -24.505, 145.565
30 Sep 2026, 14:45 1 MW DEA -24.506, 145.571
30 Sep 2026, 05:12 25 MW DEA -24.502, 145.559

This is an unconfirmed satellite detection, not an official warning. Satellites detect heat, which may be a bushfire, a hazard-reduction burn, or industrial activity. Always check the official source and, in an emergency, call 000.

Official information for QLD: Queensland Fire Department.

Frequently asked questions

Is this a real bushfire?

Unless it is marked as matched to an official incident, this is an unconfirmed satellite detection. Satellites detect heat, which can be a bushfire, a hazard-reduction burn or an industrial source. Check the official warnings for confirmation.

What does “peak intensity (FRP)” mean?

FRP (fire radiative power, in megawatts) is how much heat the fire was giving off when a satellite detected it. The peak is the highest reading across all detections — a rough guide to how intense the fire has been.

Why are several nearby detections shown as one fire?

We group satellite detections that are close together in space and time into a single fire event, so a fire front seen across multiple passes appears as one fire rather than scattered dots.

How do I get the official information for this fire?

Follow the official source link on this page (where available) and your state fire agency. In an emergency call 000.