Fire Map Today
Australia
See the live Australia fire map

Fire near Goondiwindi (QLD)

Satellite detection (unconfirmed)

Intense fire near Goondiwindi (QLD), first detected 30 Sep 2026 and last seen . It has been picked up by 39 satellite detections, peaking at 66 MW.

Status
Recent
First detected
30 Sep 2026, 00:38 UTC
Last detected
30 Sep 2026, 15:07 UTC
Duration
14.5 h
Detections
39
Peak intensity (FRP)
66 MW
Peaked at
30 Sep, 00:48 UTC
Fire footprint
2.1 km × 1.9 km
Detection sources
39 DEA
State
QLD
Confirmation
Satellite only
Data source
DEA

Satellite detections — 39 hot spots

This fire is 39 satellite heat detections merged into one event across 1 day (39 DEA). Each row is one satellite pass over a burning pixel — all of them are plotted on the map above, where the most recent detections are ringed in white. Tap any point on the map for its time and intensity, or switch on the heat map (top-right) to see where activity concentrated.

Time (UTC)IntensitySourceLatitude, Longitude
30 Sep 2026, 15:07 1 MW DEA -28.120, 150.669
30 Sep 2026, 04:35 6 MW DEA -28.122, 150.670
30 Sep 2026, 04:35 5 MW DEA -28.116, 150.668
30 Sep 2026, 04:35 6 MW DEA -28.122, 150.670
30 Sep 2026, 04:35 5 MW DEA -28.116, 150.668
30 Sep 2026, 04:35 6 MW DEA -28.122, 150.670
30 Sep 2026, 04:35 5 MW DEA -28.116, 150.668
30 Sep 2026, 04:27 — DEA -28.113, 150.663
30 Sep 2026, 04:27 — DEA -28.117, 150.663
30 Sep 2026, 04:27 — DEA -28.117, 150.667
30 Sep 2026, 04:27 — DEA -28.121, 150.667
30 Sep 2026, 03:51 12 MW DEA -28.118, 150.670
30 Sep 2026, 03:51 4 MW DEA -28.123, 150.669
30 Sep 2026, 03:51 6 MW DEA -28.120, 150.668
30 Sep 2026, 03:51 6 MW DEA -28.116, 150.668
30 Sep 2026, 03:47 — DEA -28.121, 150.667
30 Sep 2026, 03:31 6 MW DEA -28.120, 150.669
30 Sep 2026, 03:31 6 MW DEA -28.116, 150.668
30 Sep 2026, 03:31 6 MW DEA -28.117, 150.664
30 Sep 2026, 03:31 2 MW DEA -28.109, 150.663
30 Sep 2026, 03:22 — DEA -28.106, 150.659
30 Sep 2026, 03:22 — DEA -28.117, 150.667
30 Sep 2026, 02:54 5 MW DEA -28.123, 150.668
30 Sep 2026, 02:54 17 MW DEA -28.117, 150.668
30 Sep 2026, 02:54 18 MW DEA -28.114, 150.665
30 Sep 2026, 02:46 — DEA -28.109, 150.659
30 Sep 2026, 02:46 — DEA -28.113, 150.663
30 Sep 2026, 02:46 — DEA -28.113, 150.667
30 Sep 2026, 02:46 — DEA -28.117, 150.663
30 Sep 2026, 02:46 — DEA -28.117, 150.667
30 Sep 2026, 02:46 — DEA -28.121, 150.663
30 Sep 2026, 02:46 — DEA -28.121, 150.667
30 Sep 2026, 01:28 26 MW DEA -28.123, 150.657
30 Sep 2026, 01:18 23 MW DEA -28.123, 150.657
30 Sep 2026, 01:08 24 MW DEA -28.123, 150.657
30 Sep 2026, 00:58 34 MW DEA -28.123, 150.657
30 Sep 2026, 00:48 66 MW DEA -28.123, 150.657
30 Sep 2026, 00:48 22 MW DEA -28.123, 150.679
30 Sep 2026, 00:38 32 MW DEA -28.123, 150.657

📅 All fires on 30 Sep 2026

Other fires nearby

This is an unconfirmed satellite detection, not an official warning. Satellites detect heat, which may be a bushfire, a hazard-reduction burn, or industrial activity. Always check the official source and, in an emergency, call 000.

Official information for QLD: Queensland Fire Department.

Get alerts for this fire · All current fires

Frequently asked questions

Is this a real bushfire?

Unless it is marked as matched to an official incident, this is an unconfirmed satellite detection. Satellites detect heat, which can be a bushfire, a hazard-reduction burn or an industrial source. Check the official warnings for confirmation.

What does “peak intensity (FRP)” mean?

FRP (fire radiative power, in megawatts) is how much heat the fire was giving off when a satellite detected it. The peak is the highest reading across all detections — a rough guide to how intense the fire has been.

Why are several nearby detections shown as one fire?

We group satellite detections that are close together in space and time into a single fire event, so a fire front seen across multiple passes appears as one fire rather than scattered dots.

How do I get the official information for this fire?

Follow the official source link on this page (where available) and your state fire agency. In an emergency call 000.