See the live Australia fire map

Fire near Murray River (NSW)

Near an official incident

Official warning: Advice (Under control) — NSW RFS · official source

Very intense fire near Murray River (NSW), first detected 15 Nov 2026 and last seen . It has been picked up by 55 satellite detections, peaking at 278 MW.

Status
Recent
First detected
15 Nov 2026, 02:58 UTC
Last detected
15 Nov 2026, 04:08 UTC
Duration
1.2 h
Detections
55
Peak intensity (FRP)
278 MW
Peaked at
15 Nov, 03:30 UTC
Fire footprint
3.5 km × 5.5 km
Burnt area (perimeter)
343 ha
Detection sources
55 DEA
State
NSW
Confirmation
Official
Data source
DEA

Burnt area & fire boundaries

Official mapped boundaries overlapping this fire — the ground it has burned. These are drawn on the map above (the shaded red areas). Boundaries are captured periodically, so the true edge may have moved since.

  • SWAN HILL RD, MURRAY DOWNS 343 ha · 10.4 km perimeter · Rural Fire Service · mapped

Official incident details

Warning level
Advice
Type
Grass Fire
Status
Under control
Reported size
343 ha
Agency
NSW RFS
Updated
Official advice (verbatim):
ALERT LEVEL: Advice
LOCATION: SWAN HILL RD, MURRAY DOWNS 2734
COUNCIL AREA: Murray River
STATUS: Under control
TYPE: Grass Fire
FIRE: Yes
SIZE: 343 ha
RESPONSIBLE AGENCY: Rural Fire Service
UPDATED: 18 Nov 2026 01:05

Official source ↗

Crew, appliance and aircraft numbers aren't published in Australia's open incident feeds, so we can't list firefighters here — follow the official source above for operational detail.

Satellite detections — 55 hot spots

This fire is 55 satellite heat detections merged into one event across 1 day (55 DEA). Each row is one satellite pass over a burning pixel — all of them are plotted on the map above, where the most recent detections are ringed in white. Tap any point on the map for its time and intensity, or switch on the heat map (top-right) to see where activity concentrated.

Time (UTC)IntensitySourceLatitude, Longitude
15 Nov 2026, 04:08 65 MW DEA -35.300, 143.643
15 Nov 2026, 03:38 17 MW DEA -35.300, 143.619
15 Nov 2026, 03:38 41 MW DEA -35.274, 143.642
15 Nov 2026, 03:38 150 MW DEA -35.300, 143.643
15 Nov 2026, 03:30 20 MW DEA -35.294, 143.658
15 Nov 2026, 03:30 133 MW DEA -35.295, 143.650
15 Nov 2026, 03:30 78 MW DEA -35.295, 143.642
15 Nov 2026, 03:30 56 MW DEA -35.284, 143.657
15 Nov 2026, 03:30 170 MW DEA -35.284, 143.649
15 Nov 2026, 03:30 108 MW DEA -35.287, 143.657
15 Nov 2026, 03:30 278 MW DEA -35.288, 143.649
15 Nov 2026, 03:30 23 MW DEA -35.288, 143.641
15 Nov 2026, 03:30 9 MW DEA -35.304, 143.640
15 Nov 2026, 03:30 44 MW DEA -35.297, 143.652
15 Nov 2026, 03:30 44 MW DEA -35.298, 143.648
15 Nov 2026, 03:30 39 MW DEA -35.298, 143.644
15 Nov 2026, 03:30 39 MW DEA -35.298, 143.640
15 Nov 2026, 03:30 20 MW DEA -35.292, 143.656
15 Nov 2026, 03:30 44 MW DEA -35.292, 143.652
15 Nov 2026, 03:30 56 MW DEA -35.286, 143.655
15 Nov 2026, 03:30 168 MW DEA -35.287, 143.647
15 Nov 2026, 03:30 105 MW DEA -35.290, 143.655
15 Nov 2026, 03:30 136 MW DEA -35.290, 143.651
15 Nov 2026, 03:30 23 MW DEA -35.291, 143.643
15 Nov 2026, 03:30 136 MW DEA -35.290, 143.647
15 Nov 2026, 03:30 20 MW DEA -35.294, 143.658
15 Nov 2026, 03:30 133 MW DEA -35.295, 143.650
15 Nov 2026, 03:30 78 MW DEA -35.295, 143.642
15 Nov 2026, 03:30 56 MW DEA -35.284, 143.657
15 Nov 2026, 03:30 170 MW DEA -35.284, 143.649
15 Nov 2026, 03:30 108 MW DEA -35.287, 143.657
15 Nov 2026, 03:30 278 MW DEA -35.288, 143.649
15 Nov 2026, 03:30 23 MW DEA -35.288, 143.641
15 Nov 2026, 03:30 9 MW DEA -35.304, 143.640
15 Nov 2026, 03:30 39 MW DEA -35.298, 143.640
15 Nov 2026, 03:30 20 MW DEA -35.292, 143.656
15 Nov 2026, 03:30 44 MW DEA -35.292, 143.652
15 Nov 2026, 03:30 168 MW DEA -35.287, 143.647
15 Nov 2026, 03:30 23 MW DEA -35.291, 143.643
15 Nov 2026, 03:30 136 MW DEA -35.290, 143.647
15 Nov 2026, 03:23 — DEA -35.294, 143.636
15 Nov 2026, 03:23 — DEA -35.294, 143.639
15 Nov 2026, 03:23 — DEA -35.298, 143.636
15 Nov 2026, 03:23 — DEA -35.298, 143.639
15 Nov 2026, 03:23 — DEA -35.298, 143.643
15 Nov 2026, 03:23 — DEA -35.302, 143.636
15 Nov 2026, 03:18 116 MW DEA -35.300, 143.619
15 Nov 2026, 03:18 208 MW DEA -35.300, 143.643
15 Nov 2026, 03:18 164 MW DEA -35.324, 143.644
15 Nov 2026, 03:08 74 MW DEA -35.300, 143.643
15 Nov 2026, 03:08 60 MW DEA -35.324, 143.620
15 Nov 2026, 02:58 89 MW DEA -35.300, 143.619
15 Nov 2026, 02:58 97 MW DEA -35.300, 143.643
15 Nov 2026, 02:58 50 MW DEA -35.324, 143.620
15 Nov 2026, 02:58 46 MW DEA -35.324, 143.644

Other fires nearby

This satellite fire has been matched to an official incident (see the warning above). The official advice is the authority — always follow your fire agency, and in an emergency call 000.

Official information for NSW: NSW Rural Fire Service.

Frequently asked questions

Is this a real bushfire?

Unless it is marked as matched to an official incident, this is an unconfirmed satellite detection. Satellites detect heat, which can be a bushfire, a hazard-reduction burn or an industrial source. Check the official warnings for confirmation.

What does “peak intensity (FRP)” mean?

FRP (fire radiative power, in megawatts) is how much heat the fire was giving off when a satellite detected it. The peak is the highest reading across all detections — a rough guide to how intense the fire has been.

Why are several nearby detections shown as one fire?

We group satellite detections that are close together in space and time into a single fire event, so a fire front seen across multiple passes appears as one fire rather than scattered dots.

How do I get the official information for this fire?

Follow the official source link on this page (where available) and your state fire agency. In an emergency call 000.